2 Pre-Outs?

Are you stacking?
Most speakers will not sound good played simultaneously with annother pair.
Most speakers introduce their own phase shifts throughout the spectrum. It would be rare that two models, from two different manufacturers, with two different efficencies would have the same phase shifting characteristics. Regardless of phase going into the speakers you are hearing serious cancelation.

Good luck!

I have done experiments with 2 pairs of speakers playing together before. It can work but you have to really REALLY work at getting them in the right spots so as to not get wave interference - which sounds to me is the problem you are having. In my experience, just half an inch of toe-in can make or break it. If you have them close to each other, it will be much easier. I don't think your preamp is the issue - just speaker placement and/or compatibility.

It is doable of course, otherwise home theater would be a crock of s, but stereo imaging demands much more accuracy in your speaker placement.

There is a large difference between home theater/surround sound and two pairs of speakers simply playing the same information. HT involves intentional differences in phase and timing for matrixed surround sound and discrete channels of information for DVD's.

Otherwise we could simply use the B-speaker outputs of a stereo receiver to surround ourselves with sound.

The difference in phase is what we are talking about, just like you said in both of your posts. Also, the difference isn't large at all - it all comes down to playing with just a few milliseconds.

Using the B-speaker outputs works very well for surrounding yourself with sound. I don't know if you have actually tried it but I have and it sounds rather realistic if you get the positioning right.

Of course, I am only talking about music, like Drmoles is, so you can't expect there to be any sort of "decoding" needed - just a few milliseconds delay to create a feeling of ambient space and that is pretty easy to do.

I'm a bit confused. Are you passively bi-amping one pair of speakers, or, are you simutaneously running two pairs of speakers?