$2000 turntable system


Been putting it off long enough, but decided it’s time to bite the bullet and take the vinyl plunge. (mixed metaphor alert)
Don’t want to take my usual multiple expensive false steps. The learning curve here looks pretty steep, so I figured to ask you all for some advice. Thinking to spend $2K - 2.5K. Likely to pair it with my PrimaLuna Dialogue HP Integrated and Revel F206s. Might possibly set it up with my Classe SSP-800/ Classe CA5200/ Martin Logan Montis.
What I came up with after a couple of hours of research were:

Rega PL3 turntable $945
Rega TT PSU power supply $395
Rega Exact 2 MM cartridge $595
Parasound Zphono phono stage $199

Total: $2134

Was considering Vincent PHO 8 phono stage $299 and Dynavector 10x5 MC cartridge $650 as alternatives.

Any suggestions?
Thanks,
Leo


leotis
Been there done that :)
Swapped in the KT150 and the Mullard CV4003.
Sounds freaking wonderful with that combo IMO. In case any PrimaLuna guys are interested, the Mullard really smooths out the ultralinear mode. Sounds about as sweet as the triode mode. And the KT150 allows the Amp to really get a grip on the somewhat inefficient Revels.
Thanks for the suggestion. :)
I just put in some KT150's a couple of nights ago and WOW!!! Freaking awesome power tubes and so far the best yet. My next step is to put in the Mullard CV4003 but I wanted to get a feel for the KT150's first.
I tried the Brimar first and initially was impressed by how it opened up the sound. But eventually started to seem a little bright on some material, to my taste anyway. The CV4003 are sooo good, I’ve got no interest in trying anything else. First tried just the 2 input tubes. So good I replaced the other 4 as well, not expecting the same degree of impact...wrong. The driver tubes make a big difference as well. Unfortunately Upscale bumped the price. Now $105 each. I'm sure you can find them cheaper but 6 perfect matching tubes that you know are gonna be good may be worth extra to some people.

Leotis I currently have some Cifte 12au7 in the front two slots and they really opened up the sound. However, I feel like the bass output is diminished somewhat especially since the KT150's should be pumping out some really good bass.  Not that they don't but should be more. Before the KT150s I noticed when rolling in some other 12au7's tubes awhile back (Psvane I think) the bass wasn't as strong as when I had the Mullard's (CV4003) in so I rolled the Mullard's back in and viola more bass. I have 2 sets of Mullard's so I am going to roll in one set at a time and evaluate but like you I have the feeling the Mullard's are going to be the cats meow :)
You may already be aware of ...
http://www.thetubestore.com/.

They will match your tubes
See http://www.thetubestore.com/Matched-Sections-Service

I used to purchase all my tubes from them and they were pretty quick on the delivery and reasonable prices

Regards...