300b lovers

I have been an owner of Don Sachs gear since he began, and he modified all my HK Citation gear before he came out with his own creations.  I bought a Willsenton 300b integrated amp and was smitten with the sound of it, inexpensive as it is.  Don told me that he was designing a 300b amp with the legendary Lynn Olson and lo and behold, I got one of his early pair of pre-production mono-blocks recently, driving Spatial Audio M5 Triode Masters.  

Now with a week on the amp, I am eager to say that these 300b amps are simply sensational, creating a sound that brings the musicians right into my listening room with a palpable presence.  They create the most open vidid presentation to the music -- they are neither warm nor cool, just uncannily true to the source of the music.  They replace his excellent Kootai KT88 which I was dubious about being bettered by anything, but these amps are just outstanding.  Don is nearing production of a successor to his highly regard DS2 preamp, which also will have a  unique circuitry to mate with his 300b monos via XLR connections.  Don explained the sonic benefits of this design and it went over my head, but clearly these designs are well though out.. my ears confirm it. 

I have been an audiophile for nearly 50 years having had a boatload of electronics during that time, but I personally have never heard such a realistic presentation to my music as I am hearing with these 300b monos in my system.  300b tubes lend themselves to realistic music reproduction as my Willsenton 300b integrated amps informed me, but Don's 300b amps are in a entirely different realm.  Of course, 300b amps favor efficient speakers so carefully component matching is paramount.

Don is working out a business arrangement to have his electronics built by an American audio firm so they will soon be more widely available to the public.  Don will be attending the Seattle Audio Show in June in the Spatial Audio room where the speakers will be driven by his 300b monos and his preamp, with digital conversion with the outstanding Lampizator Pacific tube DAC.  I will be there to hear what I expect to be an outstanding sonic presentation.  

To allay any questions about the cost of Don's 300b mono, I do not have an answer. 




Absolutely. I read a great quote somewhere about a million years ago, that a great tube amp was the sum of three things. How good is the circuit? How good is the power supply? How good are the transformers? If you take care of all three of those things you get a great amp with most any tubes. Most commercial designs that are built to low price points make serious compromises in one or more of those areas. If you take care of business, you generally get a great amp.

@atmasphere @donsachs

Thanks for highlighting the dependence of power tubes on driver tubes as well as on power supplies and transformers. My Wavac EC300B depending on whether I use EAT300bs with their preferred Tungsols 6L6 Coke bottles or Takatsukis with their preferred Svetlana Winged ‘C’s have quite different characteristics (bold and powerful vs. subtle and detailed). When you change the driver tubes in either case a significant bit of the magic is lost. At the top end SETs are simply unbeatable in terms of musicality and soundstaging.

@antigrunge2  Glad you have an amp you love.  What I meant above is the design of the driver section of the circuit.  Your amp is using a 6L6 to drive a 300b, which is a good choice.  I was referring to many 300b amps that are pushing tubes like a 6SN7 to the max and barely driving a 300b.  The first rule of amp design is your driver section should never strain or clip before your output section does.  As for the SET vs PP on musicality and soundstaging, well I would submit you've never heard a push pull 300b amp designed like the one Lynn and I have been working on.  You might be surprised...


What I meant above is the design of the driver section of the circuit.  Your amp is using a 6L6 to drive a 300b, which is a good choice.  I was referring to many 300b amps that are pushing tubes like a 6SN7 to the max and barely driving a 300b.  The first rule of amp design is your driver section should never strain or clip before your output section does

It seems perfectly rational that the driver stage of a tube amplifier is of paramount importance. If the output tube isn’t adequately driven then how could optimal sonic performance be achieved?  The builder of my 300b SET chose the 6EM7 as a very suitable driver for the 300b. His reasoning was the same as you mentioned.

I am not an electrical engineer but I wonder how much is it the particular driver tube versus the implementation of said tube. Ralph has written in the past that the 6SN7 is a sufficient driver tube “dependent “ on its implementation in a given circuit. I have been told that the 6EM7 provides much more current, power and drive capability compared with the 6SN7.

I will say that I’ve heard an excellent sounding PSET 845 amplifier that utilized the 6SN7. I could certainly be wrong, but isn’t the 845 a more difficult tube to drive than the 300b? Anyway, no question that driver stage rivals power supply and output transformers in getting it right for tube amplifiers. So it appears that there are alternative executions that can get one there successfully.

I very much appreciate the comments this thread has generated. The education never stops.



The 6SN7 will barely drive a 300b, which is a very difficult load.   I have not worked with 845 tubes nor will I given the high voltages and heat involved, but I did look at the data sheet.  Yes, it takes more negative grid voltage to bias one than a 300b, but I have no idea of how capacitive a load an 845 is, and I really don't have time to research it.  Ralph is right in that a 6SN7 is adequate to drive many tubes.  It makes a wonderful driver for any of the usual octal pentodes like kt88 or el34, or a 6V6 or 6L6.  Works great.  But a 300b taxes a 6SN7.  It works as in the original Reichert amp, but if you want to unlock the unlimited dynamics of the 300b you need a much better driver setup.  The reason the original Dynaco ST70 was a marignal amp was it had a wimpy driver section that would clip before the output tubes, or about the same time, plus it had a very mediocre power supply.  It was a pleasant amp and a zillion of them sold.  But if the driver and power supply were better it would have been a much better amp.  The output transformers are not world class, but they are quite good and capable of more than the rest of the amp could provide.   

You can also improve the performance of any driver tube by changing the way it is loaded.   For example, a CCS will give far better drive capability than just typical RC coupling.   But CCS circuits do have some coloration.  Not so bad in a pentode amp, but very noticeable in a DHT amp.   The other ways are to add inductance to the plate of the driver with either LC (choke cap) coupling or full on interstage transformer coupling.  The inductance the driver tube plate sees "helps" it out to drive the 300b.  There are differences in the way all of these approaches sound, but all are better than just a plate load resistor and coupling cap.  I have explored all of them thoroughly for a year with the 300b project and found a solution that Lynn and I like and sounds the most musical.