300b lovers

I have been an owner of Don Sachs gear since he began, and he modified all my HK Citation gear before he came out with his own creations.  I bought a Willsenton 300b integrated amp and was smitten with the sound of it, inexpensive as it is.  Don told me that he was designing a 300b amp with the legendary Lynn Olson and lo and behold, I got one of his early pair of pre-production mono-blocks recently, driving Spatial Audio M5 Triode Masters.  

Now with a week on the amp, I am eager to say that these 300b amps are simply sensational, creating a sound that brings the musicians right into my listening room with a palpable presence.  They create the most open vidid presentation to the music -- they are neither warm nor cool, just uncannily true to the source of the music.  They replace his excellent Kootai KT88 which I was dubious about being bettered by anything, but these amps are just outstanding.  Don is nearing production of a successor to his highly regard DS2 preamp, which also will have a  unique circuitry to mate with his 300b monos via XLR connections.  Don explained the sonic benefits of this design and it went over my head, but clearly these designs are well though out.. my ears confirm it. 

I have been an audiophile for nearly 50 years having had a boatload of electronics during that time, but I personally have never heard such a realistic presentation to my music as I am hearing with these 300b monos in my system.  300b tubes lend themselves to realistic music reproduction as my Willsenton 300b integrated amps informed me, but Don's 300b amps are in a entirely different realm.  Of course, 300b amps favor efficient speakers so carefully component matching is paramount.

Don is working out a business arrangement to have his electronics built by an American audio firm so they will soon be more widely available to the public.  Don will be attending the Seattle Audio Show in June in the Spatial Audio room where the speakers will be driven by his 300b monos and his preamp, with digital conversion with the outstanding Lampizator Pacific tube DAC.  I will be there to hear what I expect to be an outstanding sonic presentation.  

To allay any questions about the cost of Don's 300b mono, I do not have an answer. 




Don and I reflected on the optimum interface between the Raven preamp and Statement power amps. We obviously wanted the highest-quality interface directly between the two, while retaining compatibility with the rest of the audio world.

There’s an input switch on the Statement 300B that has two positions: XLR DIRECT and RCA XFMR. They do what they say: the direct switch goes straight to the 6SN7 grids through twisted-pair wiring, with the input transformer secondary completely disconnected from the circuit. The RCA position goes through the studio-grade transformer, which does the phase splitting and isolates the RCA grounds, preventing ground loops.

This provides optimal quality with the Raven preamp, which has transformer-coupled balanced outputs, and also offers compatibility with existing vacuum tube and solid-state preamps with balanced XLR outputs. For preamps with unbalanced RCA outputs, the input transformer provides accurate, low-distortion phase splitting as well as ground decoupling.

Don and I spent a surprising amount of time coming to this input topology. It has the cleanest interface to the Raven, while offering flexible connections to other components.

This is getting dangerously close to an infommercial😉   Really, I have enjoyed the thread and never expected it to have this sort of life.   I just received the final version of the preamp output transformers from Dave Geren at Cinemag yesterday and installed them.  They are the next level up.  I expected a subtle improvement, but I am quite shocked.  The prototypes were the best I had heard, but the final version has improvements to the core material to give even more detail and even better bass response.   You can hear it right away.   These will be in Seattle and again, I hope to get everyone's opinion who can stop by and listen.

I will state again that there are many paths to audio nirvana and I would never claim that Lynn and I are on the only true path.  For those who love SETs please come hear these amps and let us know what you think.  You may be surprised.  My own personal bias (pun intended) is towards an all tube system.  I can hear any solid state device in the signal path and don't like it.   Yes, my Lampizator Pacific DAC has a solid state chip set doing the DAC part of the job, but that feeds the output tube grids directly and from that DAC chip set to the speaker is all tubes.  I would always choose a tube friendly speaker so that I can use a tube amp.  I realize there are those folks who love speakers that are difficult loads and require big solid state amps to drive them.  So be it.  There is no right or wrong.  There is what we like.  If you can visit the Pacific Audio Fest in Seattle you will hear the sort of system I favor.   All tubes, these amps and preamp, and some wonderful all passive open baffle speakers from Spatial Audio Labs.  There will be no DSP or powered subs or anything like that in the signal path.   The only solid state device in the chain will be the DAC portion of the Lampizator Pacific, then it is all tubes and passive speakers.  We hope you like it!

This thread has been informative and inspiring and I’m looking forward to hearing these amps at the PAF next month.

This thread has also caused me to reflect on the question of "what should I do" or "what should we do?" given the fact that Don & Lynn’s new amps are not available to purchase at this time and that, when they are, they are likely to be out of my budget.

My guess is that many of us who have followed this thread with great interest already have equipment that reflects the performance goals, priorities and values of Don and Lynn. I'm grateful that there are so many options out there right now - we seem to be living in a new "golden age" of hi-fi and music. So I'm not actually discontented with my equipment right now. But I've learned a lot on this thread that has provoked some new ideas and questions and for that I'm grateful.

The interesting thing is that "conventional" amps like PP KT88’s can be substantially improved as well. For example, floating paraphase phase inverters instead of split-load inverters or Mullard long-tail pairs. The phase division isn’t as precise, which is why they dropped out of favor, but the drive capability is much stronger than the other two types. And they really sound better. That’s one thing.

Another is dual B+ power supplies per channel, and is especially worthwhile in any PP amp, more so than SE. Isolating the noise and distortion of the final section from the driver + input is very worthwhile and lifts the amp into another class. This applies to solid-state as well. That’s another thing.

The third thing is scaling up driver current two or three times, and choosing the most linear driver tube that is available. Typically, this will be a medium-power tube, not a video amplifier out of a 1958 color TV. Video amps are powerful but linearity was not a major consideration in the tube design. You might get a linear one, but you might not. And you really want matched pairs for equal and symmetric distortion spectra.

Combine these three things, and the PP KT88 is now on a different level, but still has the same power as before. The slew rate goes up, and the noise and distortion go down.

Am I going to design this? Nope. But folks in the medium to high-power PP KT88 arena should check it out. You can’t keep making copies of Marantz amplifiers forever.