300b lovers

I have been an owner of Don Sachs gear since he began, and he modified all my HK Citation gear before he came out with his own creations.  I bought a Willsenton 300b integrated amp and was smitten with the sound of it, inexpensive as it is.  Don told me that he was designing a 300b amp with the legendary Lynn Olson and lo and behold, I got one of his early pair of pre-production mono-blocks recently, driving Spatial Audio M5 Triode Masters.  

Now with a week on the amp, I am eager to say that these 300b amps are simply sensational, creating a sound that brings the musicians right into my listening room with a palpable presence.  They create the most open vidid presentation to the music -- they are neither warm nor cool, just uncannily true to the source of the music.  They replace his excellent Kootai KT88 which I was dubious about being bettered by anything, but these amps are just outstanding.  Don is nearing production of a successor to his highly regard DS2 preamp, which also will have a  unique circuitry to mate with his 300b monos via XLR connections.  Don explained the sonic benefits of this design and it went over my head, but clearly these designs are well though out.. my ears confirm it. 

I have been an audiophile for nearly 50 years having had a boatload of electronics during that time, but I personally have never heard such a realistic presentation to my music as I am hearing with these 300b monos in my system.  300b tubes lend themselves to realistic music reproduction as my Willsenton 300b integrated amps informed me, but Don's 300b amps are in a entirely different realm.  Of course, 300b amps favor efficient speakers so carefully component matching is paramount.

Don is working out a business arrangement to have his electronics built by an American audio firm so they will soon be more widely available to the public.  Don will be attending the Seattle Audio Show in June in the Spatial Audio room where the speakers will be driven by his 300b monos and his preamp, with digital conversion with the outstanding Lampizator Pacific tube DAC.  I will be there to hear what I expect to be an outstanding sonic presentation.  

To allay any questions about the cost of Don's 300b mono, I do not have an answer. 




To simplify.. All tubes have distortion. The higher orders are what are like fingernails on a blackboard to your ear. DHTs have lower levels of higher order distortion than other types of tubes, and good indirectly heated octals like the 6SN7 and 6V6 are reasonable regarding distortion in the higher harmonics. When I rebuilt a ton of vintage tube gear I instantly could hear that pieces using small signal tubes, particularly the 12au7 were not very good. If you see a 12au7 in a piece of gear other than a tuner, go buy something else. I always preferred amps with octal tubes as drivers. Anyway, to keep upper harmonic distortion down we choose a great DHT, the 300b for the output tube. Traditional feedback approaches can keep higher order distortion down, but phase split circuits and the usual coupling methods, and the feedback itself rob the amp of clarity. Push pull amps have lower levels of distortion. Class A is the way to go. If you can build an amp with no feedback at all and solve all the problems it will sound cleaner and clearer. The driver stage has to be able to really push a 300b. There are numerous forms of coupling, but interstage transformers (if really well made and designed for the circuit) solve a lot of problems. Recovery around clipping is really important for the driver stage and the transformer coupling aids that considerably over traditional RC coupling. LC coupling sounds very good for an input stage where an interstage transformer would have to deal with the higher impedance of the input tube. Power supply topology and design is critical and the output stage should be isolated from the input and driver stages. Of course the quality of the output transformers is a key as well as the power transformer, which should have good regulation. I am sure I am leaving some things out, but those are some key points of the design.


I did check catalog of one European manufacturer for SE to PP interstage transformers. Within the limited offerings, it does seem that a tube with low Rp is needed in the SE stage - if not a DHT, ones like 6EM7 (the half with 750ohms Rp) may work. The gain will be less, but can still work with an active preamp. 


Ultimately, I agree that it all depends on the design goal - I wonder whether having some 2nd order harmonic would end up being a good thing for someone who prefers sound of SETs. But there is a lot factors to balance in such a design that uses SE in the first stage.

What a great thread!  Reminds me of the early 2000’s when I was on here more often.  I love how charles1dad said it back a ways so I’d like to repeat it, hope he doesn’t mind: “If a thread topic generates quality insight, information and perspectives from genuinely knowledgeable and earnest contributors then this is what happens.”

In January 2021 I bought from Don Sachs a Valhalla integrated amp.  I couldn’t be happier with the sound of my system.  After years in the “pursuit” I have felt no desire to change anything.   The Spatial Audio X3 speakers have a lot to do with what I love about my system now.

Don mentioned in an email last month that he was working on some 300B monos for the Seattle show.  Immediately I was interested and have been looking forward to hearing them in the Spatial room since I’ll be there.  Although much of the technical info in this thread is over my heard it is fascinating to read.  I’ve gained so much further insight into Don’s expertise, learned about Lynn Olson and how the two have worked together with their combined knowledge on this amazing project.  I think anyone who has enjoyed one of Don’s masterpieces would probably feel these new amps are a must have, including me.  It’s fortunate I’m so happy with the Valhalla since the new amps might be out of reach.  Hearing them in the Spatial room could be dangerous.

Looking forward to meeting Don and Lynn and would be nice to see Clayton again this year like last.  Hope he can make it.

Jeff S.

Gig Harbor, WA


I don’t mind.😊

I am interested in your listening impressions of this amplifier  at  the upcoming Pacific audio show.



Being an owner of Don's Vahalla tube integrated, might your "handle" more appropriately be "@jeff_tubes"?   ;-)  

 I have the Triode Masters and heard the Sapphires and was not compelled to upgrade.  However, the X-series is a different kettle of fish so I am enthused to hear them with Don and Lynn's newest electronics, presented in their best possible light.  Oh, and the excellent Lampizator DAC which will clearly complement the rest of the gear.  

I reiterate and amplify my love for these new mono's, which sounds cliche, but they sound like no amps at all, just masterful reproduction of the music in such an effortless and ethereal way... the sound is suspended in the air in the room with a completely realistic manner.  The amps just completely get out of the way with a sonic signature that I would not describe with adjectives like "warm" or "cool", just completely realistic to the source of the music.  This uncanny sound reproduction you will hear when you visit the room, of that I am confident.   I hope I run into you and others on this thread in the room to get acquainted and share our impressions of what we hear.

I wish Charles would be there so I could meet him and applaud him on his excellent contributions on this forum, a paragon of audio knowledge and the utmost of civility.  He clearly knows the sonic splendor of 300b gear.  For me, hearing these mono's, it is a bell that can not be unrung.  I think other attendees to the room might come to the same conclusion.