Serus: You're the one who's ignoring observations. You're ignoring all the cases where people have claimed to hear differences where there really were none to be heard (like where the switch wasn't flipped). Ignoring half the data is not the way to good science, my friend.
a great take on big$ cables
i was talkin to a friend about cables & wire's & no matter how hard i try to tell him its not needed he wont budge because he has heard that big buck wires are the way to go,i even showed him this web page & after reading it his response was this "if they didnt work then why would they sell them" after talking for hours i gave up & gave him a demo,he heard no difference & neither did i but he still believe's.
there isnt alot of info published on wires except by manufacturer's so i thought i'd post this so every body could enjoy it.
this is a link to roger russell's web site where he gives his thought's on wire's & cable's & reports on blind testing that was done,if your not familuar with him he was a audio engineer for many years & from some of the gear i own that he designed i'd say a damm fine engineer too.
if you are of the belief that big buck cable's are not worth using you may get a chuckle but if your a firm believer then you might be bummed out,anyway's here's the link if you care to read about wire's.
{http://www.roger-russell.com/wire/wire.htm}
there isnt alot of info published on wires except by manufacturer's so i thought i'd post this so every body could enjoy it.
this is a link to roger russell's web site where he gives his thought's on wire's & cable's & reports on blind testing that was done,if your not familuar with him he was a audio engineer for many years & from some of the gear i own that he designed i'd say a damm fine engineer too.
if you are of the belief that big buck cable's are not worth using you may get a chuckle but if your a firm believer then you might be bummed out,anyway's here's the link if you care to read about wire's.
{http://www.roger-russell.com/wire/wire.htm}
- ...
- 64 posts total
Cables that have larger capacitive or inductive characteristics than plain old speaker wire could act as filters on the audio signal, shifting it's tonal balance. If you've ever messed around putting caps and resistors in a phono stage to match a cartridge, its likely you've heard the difference these reactive circuit elements can make, for example moving the perceived depth of someone's voice forward or backward in the soundstage. I think this is a physical effect, not imaginary. |
Stever: You're absolutely right. And no one's ever claimed otherwise. All that's been claimed is that one brand of 12-gauge copper cable sounds exactly like another. If you want to make cables sound different, you have to make them *very* different--greatly increase resistance, or monkey around with capacitance and/or inductance. The former will attenuate the overall level of the signal, while the latter can cause frequency response roll-offs. Why you'd want a cable that wasn't flat is beyond me, but there's no accounting for taste. BTW, weren't you the guy who was planning to audition Transparent cables? You might want to take a look at what they're really made of: http://cable.tcnerd.com/whymit.asp |
- 64 posts total