2. speakers
  3. 149035-103414

ADS L1290 Speakers

Hello all and happy Memorial Day weekend.  I recently made a couple changes to my audio system.  I was using a Yamaha DSP A1 integrated amp (about 120 watts per channel) with a set of Wharfedale Rubiance RB-27 floor standing speakers (both about 20 years old).  I recently acquired a pair of ADS L1290 speakers and a Sansui B-2101 power amp at 200 watts per channel (with 600 watt).  I am keeping the Yamaha in line for its preamp (at least for the time being).  I also will continue to use a 15" Mirage FRX-S15 powered downfiring subwoofer.

Which is a better option? The Yamaha has a setting to push everything below 70 Hertz just to the subwoofer.  Would it be better to engage that or have the full signal range go to the L1290's with the subwoofer in play? 

Also, what's the best toe-in for these speakers?

Thanks
128x128cspiegs
johnnyb53
3,510 posts
 
    Not long after I got a pair of ADS L1090s (very similar to 1290s but with ~7" dia. twin woofers instead of 8" ones. Then I moved to the Boston area and it was easy to get some factory platform/plinths for them. A year later I got some floor spikes for the plinths. This tightened up and clarified the sound. I towed the speakers in toward the sided of my head and got an improvement in imaging.

    A few years later I got a VSP Labs Gold Edition very high current MOSFET amp. This was J. Gordon Holt's favorite amp when it was in production in the mid-'80s. It put out 200 wpc into 8 ohms, double that into 4 ohms, was stable down to zero ohms.

That extra power and current made the bass deeper, fuller, *and* cleaner.
cspiegs's avatar
cspiegs OP
42 posts
 
Johnnyb53, I have read that the ADS's like lots of power.  Your VSP Labs is similar in power rating to my Sansui.  When I was running them with my Yamaha (110 wpc), they were nice, but really came alive with the Sansui.  I've heard the Sansui has tonal characteristics like a tube amp and will sweeten the sound of the L1290's. I don't have much experience with different amps, but this combination seems like a winner. 
loomisjohnson
1,946 posts
 
the 1290s are rated at 90db and i never found them to be power-hungry--i ran mine with a 60w arcam integrated and a 70w rotel amp and they sounded very good (which isn't to say they wouldn't sound better with more power, but they are quite efficient)
cspiegs's avatar
cspiegs OP
42 posts
 
Loomisjohnson, I always thought these were efficient speakers.  However, they sound much better with the Sansui B-2102 than my Yamaha DSP A1.  Of course it could be more of better components in the Sansui. 
loomisjohnson
1,946 posts
 
cspiegs--i'm not surprised. the dsp a1 seems to have a good power supply but it's an avr and has alot of electronic circuitry and junk in the box--your sansui is likely a lot cleaner signal
More to discover