Aesthetix Rhea signature phono stage


Looking at a second hand Aesthetix Rhea signature phono stage, anyone had experience with this unit.
I want to use it with a second tone arm, aready have a ss stage so would like to have a valve phono as a contrast.
It is a bit more in cost than a new manley Chinook, which I had also considered.
I have read the Aesthetix can be noisy.
I use Lyra, VdH and shelter carts.
Would appreciate any feedback.
dctom
sbrown, Yes, I noticed that they seem to have replaced all the 2uF output capacitors with 4uF values.  I got this from poring over the photos on their website.  Thus I cannot see whether truly ALL the 2uF caps are replaced with 4uF values.  Perhaps you know. 
thekong, The in-circuit coupling capacitors are all 0.22uF values and the output coupling capacitors (which value is used in the Janus both between its phono section and its linestage and at the output of the linestage) are all 2uF in the "plain" Janus, and as noted appear to be 4uF in the Signature versions of both the Janus and the Rhea.

I used TFTF Vcaps to replace all the 0.22uF values, which is a huge upgrade over the REL metallized polypropylenes in the plain version of the Janus.  Then I used some polystyrene film and foil capacitors, made by the now defunct PASCAP company (Pacific Audio Supply), that I happened to have in my stash, to replace all the 2uF REL polyprops in the Janus.  Those PASCAPs are positively wunderbar.  I originally purchased 36 of them (mixed, 200V and 250V ratings) to build the needed capacitance for a speaker crossover which I later tore out of said speaker.  I quite accidentally found out how good they are in electronics by installing a few in an old Quicksilver preamplifier.  It's very difficult now to find polystyrene film and foil capacitors in values above 1uF.  I don't quite know why Aesthetix chose to increase the output capacitor values to 4uF in the Signature types; the bass is really excellent in quality and thunderous in the refurbished Janus. But hey, more capacitance can't hurt.
Why the (doubled) 4uF Dynamicaps? Perhaps one could ask Jim White, as I am sure he had his reasons. I know for a fact, they listened to many components before choosing these. When I upgraded my Calypso and Rhea from standard issue to Signature, the sonic rewards were really quite apparent. Actually, the bass did get better in depth and weight but, more importantly (to me), tone or timbres became more fleshed out and I would swear the sound stage also widened and deapened with improved transparency. But I would stress that the upgrade was an extremely balanced approach and more thoughtful than merely cap up-sizing. I understand the reluctance to spending this kind of fortune (4k Signature), yet I also understand value and genius in outstanding engineering. And I believe these components have proven over time to be a very good sonic value. No buyer’s remorse here.

*Could not agree more with previous comments about powering down for 20 minutes minimum before a tube swap. Both Glenn and Jim have been  adamant about this procedure! Do it or pay the price. 

Hi all, Wondering if you can use the Rhea's remote to use like a volume control through a unit besides a pre amp that requires adjustable gain. I have ballanced amps and my device that requires only XLR going to amps and my CD player with remote! Sounds great running direct from CD into my RC35 device.Wanting to run through my device into the Rhea. Will it work?