AN Kondo IO-m cartridge - Tonearms to cons

Does anyone have experience with tonearms for the IO-m (details below)? Thoughts appreciated, turntable is TW Raven AC and should support most arms. Don't really have any other issues, simply what really works with the arm.

Type: Silver Moving Coil (MC)
Output Voltage: 0.12mV (1KHz, 5cm per second)
Source Impedance: 1 Ohm
Tracking Force: 2.0 ± 0.2 g
Compliance: 6.0 × 10-6 cm/Dyne
Channel balance: within 1dB at 1KHz
Channel separation greater than 25dB at 1KHz
Weight 11 grams

Many thanks
Dear Hatari: here you have good alternatives:

Regards and enjoy the music,

Thanks Raul. I have a Graham Phantom (Dynavector XV1-S on it), so this would be a second arm/setup. Will also get an SPU one day for fun, so would be great if the second arm could handle that.

Ikeda woud be great, but would only buy from someone I know well

Certainly the Dynavector 507 is a great option, high up there and can work with that SPU I refer to.

Any thoughts on the Ortofon 309D or the EMT 997 ? I worry a little about getting an EMT set up right - I'd hire a local turntable expert to help, but I'm not a DIU guy on electronics.