Apogeee/Bryston Advice needed


Looking at the Bryston B100st to mate with Apogee Slant 6/ARC CD 3, with Rigde Street Poeima IC. Would the sound be too cool or too analitical? Speed wise the Bryston should be a good fit, opinions please? Thanks
rsjm80
Well, as you probably know, I am not a fan of solid state, especially for a supremely articulating ribbon speaker. What is your source?
using strictly my ARC CD 3 as my front end, I think that the Bryston might be too revealing with ARC CD 3 and I'd be caught with an over anilitical or etched sound, it would be a boost in the bottom end again but, I think I have to look tword maybe a Mcintosh (MA6300 or MA6500)instead that might be a better fit, just can't find 'em locally at all to listen!
Well, I'm going to agree and disagree with Muralman1. You don't need a lot of power for your Apogee hybrids - unless you want anywhere near decent bass response.

If you were open to tubes, you could have a great sounding system with something like a CJ Premier 11A, maybe an MV-60 or better yet a BAT VK-60. This setup might be a little bass shy for rock music, but the mids and highs will be so sweet it will make you cry. The classic SS pairing for the Apogee hybrids is a McCormack DNA 125 or better. I use a Songraphe SA-400 with my Cepheus 6s and it kicks ass. The SA-250 or a CJ SS amp would also work well.

IMHO, is you want to use a SS amp you should consider a tube preamp. If done right, you can get both some bass slam and still retain tube liquidity. You have a lot of choices here: ARC LS-16/26, CJ PV-10/11/12 (L versions if you are a digital guy) or any Premier product. My favorite is any Audio Note preamp, but especially the M3 and above. (careful matching to a SS amp is required) I've also had good results with the McCormack RLD and TLC line stages. Lots of other good choices here.

Finally, I would try other CD players as well. I had an ARC CD2, and it didn't do it for me with the Apogee speakers. Too analytical and cold for my taste. I am much happier with my old standby, the Meridian 508.24, but I would trade it for a G08 in a second, or an Audio Note digital transport/DAC.
Being an owner of a pair of Apogee Centaur Major's, I'd say you cannot have enough power, whether it's from tubes or solid state. That being said, Apogees are unforgiving and any 'hardness' will be audible. But that doesn't mean SS amps aren't any good. There are many good designs that will work happily with the Slant's. I'd recommend amps like the older Threshold or current designs by Nelson Pass. Also the old(er) Krell class A amps will do the job, as there are many others. Just try to audition them in your own system with your own ears. I've tried a Bryston 4B SST in my system and didn't like it, but that doesn't mean you can't be perfectly happy with the B100 ST.