Audio Research REF 3 and REF 5 Tweaks


Hi,
I was wondering what tweaks have been used successfully with these two preamps? I'm thinking specifically of footers, weights, tube dampers, powercords, etc. I haven't considered tube rolling as from what I've read, the tubes ARC recommends are probably overall the best.

I've tried several products including Vibrapods/Vibracones, and various isolation products from Herbies on my REF 3 with mixed results. (I keep going back to stock.) So far the best tweak has been to purchase and place Herbies Ultrasonic Tube dampers on the two power tubes, the 6550 and the 6h30, in the powersupply. Strangely ARC does not include dampers for these two tubes but the addition of Herbies tube dampers really cleans things up.
I use Solidsteal shelving which have been damped with sand.
So what have you all tried that you think would be a worth whild audition?
Thanks in advance,
Sgr
128x128sgr
I like EAT tube dampers on my 6H30s. The NOS 6H30 may be worth a try. I like to use a couple NOS 6H30s on the BAT, but feel that using all 8 is a bit too much.
This one is sure to work and is cheap cheap cheap!! Put one of those high end fuses in it, cost maybe $45. Everyone has their preference as to which brand works best of course, but bottom line, can't lose for the money!!
I recently re-tubed my ARC monoblocks, the supplier had Svetlana "Winged C" 6550`s which were also "Cryo-ed" 100 hr treatment by Pearl. These tube`s made a great difference in resolution and detail.

Wondering if replacing the single 6550 in the Ref 3 with the "C" cryo-ed version would or would not be a good idea.
Len w
I've tried various tweeks with my Ref-3 that normally work on other equipment, but not on ARC stuff. All of my ARC equipment )REF-3, CD-7, and PH-7 sound best by using nothing except the stock feet. The high end fuses improve the sound and using Pro Gold on all interconnects AND the tube pins make a definite improvement. I even Pro Gold the fuses. I tried various tubes, like classic Mullards in the PH-7 and found the stock tubes sound best.
Unhappily the best tweak I found for my ARC system was expensive - a Finite Element Pagode Master Rack. You have to try it to believe the difference it makes.
I have not tried them but a friend reported improvements using the Nordost Quasar Points.