audiophile grade sub panel and breakers?


Does anyone know of a high quality "audiophile" grade sub panel? I read an article from someone in the audio industry where he mentioned having used a GE industrial grade 225 amp panel with a super duty silver plated copper bus bar and bolt on low noise silver contact breakers. Anyone have any ideas? I only need a 100 amp sub panel. All input would be appreciated.
128x128keithmundy
You may want to contact Audiowaves here on agon. I recently met Jeff W and he really seems to know electrical stuff. Best, Jeff L
The grounding rods should read "spaced 10' apart", not 10". I went to correct it, but Jj2468 posted as I was making my change. I've done alot with dedicated power, including installing a NEMA box next to my electric meter. It's all on my system page. You could also look at Cincy_bob's system. Mine is a variation of his. Stan
Equi Tech makes a high grade subpanel that creates balanced power for all breakers right at the panel. They are usually used in high-end recording studios, but if you want to go all-out, and price is no object then they are the real deal. If I ever get to build a dream theater for myself or someone else then that would be my choice for the theater subpanel.

The above suggestions for grounding from other posters are excellent. There is also some great info on the Equi Tech website about optimum grounding procedures, some of which I will soon follow in my showroom theater.

Basic city electrical codes only require a minimum grounding effort. If you want better, which will greatly help your system then you have to do it yourself or pay an electrician. They may seem expensive, but they are worth it because they know what they are doing and know how to NOT get fried. Some of them will tell you that your extra grounding efforts are unnecessary because they don't really get what you are trying to do. On some of my theaters I have had to finally tell them to just do as I say, even though they don't grok the benefits. Then when they hear the theater and their jaw drops open they finally get it.

Good luck with it all, and don't forget to take extra caution with anything electrical.
DaddyO brought up a good point about Equi-Tech. When I was researching dedicated power a few years ago, I went to Equi-Tech's website and down loaded the following white papers: "Installing a Technical Grounding System", "Lifting the Grounding Enigma" and "Audio Wiring and Grounding". All three white papers were a tremendous help. Also, using a good electrician is a must. I've occasionally done subpanel work myself (with the power turned off at the main power feed), but the closer I get to the electric meter, the more I rely on my electrician. Stan
Thank you all for your input. I appreciate you all taking the time to help me. The Equi-Tech website is great! Thanks again.

Keith