Thank you for sharing your crossover upgrade experiences - I previously owned the 803D and 803 Diamond speakers - great value high tech speakers with timeless industrial design.
B&W 803D crossover caps
I am considering an upgrade of the crossover capacitors in by B&W 803Ds, particularly the mid and HF coupling caps.
I took out the top bass driver to find out what caps were installed. It looks like for the diamond tweeter B&W uses a Mundorf Supreme silver/gold, 4.7 mfd 1200V. For the mid driver there are two; a 47 mfd Mundorf MKP 400V series coupling cap (in series with the driver) and a 10 mfd Mundorf Supreme siver/gold bypassing cap (parallel to the driver).
I was thinking about changing out all three, but have a few concerns.
I was going to replace the 10 mfd, 4.7 mfd Supreme silver/gold with Supreme silver/gold/oil. Would there be enough of a difference in these two types to justify the cost? I also do not want to make the upper end any brighter.
I am also concerned about the long term reliability of oil filled caps, as some failures have been reported in warmer environments. I wonder if B&W did not use the silver/gold/oils for that reason.
The biggest impact I suspect will come from the replacement of that series 47 mfd MKP. I would probably use either the Mundorf MCap EVO (Al metalization), MCap EVO oil (Al/oil), or the MCap EVO silver/gold/oil. All three are the same size for 47 mfd, and will fit to replace the MKP. Barring the issues about oil, which might be the best sounding? Again, I want to avoid too much enhancement of the upper midrange.
I took out the top bass driver to find out what caps were installed. It looks like for the diamond tweeter B&W uses a Mundorf Supreme silver/gold, 4.7 mfd 1200V. For the mid driver there are two; a 47 mfd Mundorf MKP 400V series coupling cap (in series with the driver) and a 10 mfd Mundorf Supreme siver/gold bypassing cap (parallel to the driver).
I was thinking about changing out all three, but have a few concerns.
I was going to replace the 10 mfd, 4.7 mfd Supreme silver/gold with Supreme silver/gold/oil. Would there be enough of a difference in these two types to justify the cost? I also do not want to make the upper end any brighter.
I am also concerned about the long term reliability of oil filled caps, as some failures have been reported in warmer environments. I wonder if B&W did not use the silver/gold/oils for that reason.
The biggest impact I suspect will come from the replacement of that series 47 mfd MKP. I would probably use either the Mundorf MCap EVO (Al metalization), MCap EVO oil (Al/oil), or the MCap EVO silver/gold/oil. All three are the same size for 47 mfd, and will fit to replace the MKP. Barring the issues about oil, which might be the best sounding? Again, I want to avoid too much enhancement of the upper midrange.
- ...
- 68 posts total
- 68 posts total