Bass Amps. JBL 4350

Thanks for the advice., I guess my question was not  worded right. All these amps are way too much power but I was wondering if there is a quality sound difference between excellent quality and just average quality with just enough power to do the job for these speakers? Or does the quality of the amp make any difference below 250 hertz? Would most audiophiles hear a difference? There is something to say for having attractive big amps next to big speakers but big $$$ for appearance. thanks.      

My take is that amp quality makes a difference, an audible difference, for the upper end where the low and high mid range reside (the 2" compression driver and the 12" lower midrange cone driver), again, in my opinion amp quality is not audible at the low end.
One thing that I learned with my DIY 4350 is that for the best balanced sound I would recommend identical amps for both low and high ends, initially I had a 100W amp for the high and 200W for the low, when I change them both to 200W I could hear a marked improvement in the overall sound.
Since 4350's are bi-amplified, just turn off the amp that drives the high end and listen only to the sound of low end, at below 250Hz what is coming out of the speaker will instantly prove my point.

Thanks, I will try that suggestion turning off the bottom amp.

My suggestion was to turn off the amp that powers the upper end and listen to speaker producing frequencies under 250Hz, or the dual 15" woofers, 2235's.

Thanks again, didnt realize i wrote that, I meant what you said.