Best interconnects for Velodyne DD series


Athough frequency spektra is narrow for a sub I´m sure there
are better and worse IC:s., questions is how much.
Is silver better than copper considering reproduction of signals origin.
What about overtones (although less distinguishable than midrange), how much impact on soundstage, details etc. (not talking about placement of sub).
Anyone with experience I´d really apreciate your thoughts.

Many Thanks!
clabe
FWIW, for years I have run various subs I owned with various interconnects. The past couple years I used the Blue Jeans LC1's which are good low capacitance (and low cost) sub cables. For the first time, I disconnected the Blue Jeans and took some old speaker cables I had never used and connected them from the speaker terminals on my amp to the speaker level inputs on the subs. What I hear now is deeper and better bass than I heard from these subs before, better integration too.
I did a fair amount of research and in the past I have alwas used audioquest's top of the line silver cable. This time I got 2 f113 and needed to get xlr sub cables decided to try Blue Jeans cables. So far so good. Not sure silver really helps with a sub.

The above the kimber hero is not shileded or the right cable I would not use that in my experance sub cables do make a difference to a point, not nearly as much as other cables. Also you have to have a SUB cable they are constructed with a shield to avoid humm and generally are alot tigher sounding then if you used something else.
I use a set of sub cables made specifically for that purpose by Synergistic Research and they are excellent. Tighter, faster, deeper, more accurate and also more musical than a variety of other sub cords I tried. Synergy is obviously critical here and its whatever you like in your system. Cost is rarely an indicator of synergy, as the posts above illustrate.
Hi Fplanner!
I´ve been thinking about Synergistic Research Resolution Reference IC:s. There´s one cable for sale, but will it do for Velodyne DD10 where you have L/R inputs and one balanced.
On their homepage Subwoofer Tesla series I noticed Y-connection on one side but not on the other side.
Why is that?
Surely they must have an e-mail adress, can´t find it.

Appreciate opinions & advice!

Many Thanks!
I needed 2 cables for my setup and my guess is that you probably do as well, but I would make 2 calls.

First 1 to Velodyne - there is a tech guy in Arizona that is very good. Depending on what he says after you describe your setup and what you are trying to achieve, if you DO need a 2nd cable, I would call either Ted or Elliott at Synergistic. All three of these are good guys and will be happy to help you solve your situation.