Best Tube Amp For Sonus Faber? Or Pass XA-100.5? $6-7,500 Budget, Purchasing Used.


As the title says, I have a pair of Sonus Faber Olympica III's that I am more than pleased with, for which I am trying to determine the best available amplifier, preferably tube. Of course, there are always budget limitations and my budget for this amp would be $6-7,500, and I would be buying used to maximize purchasing power.

Based on a lot of research, and quite a few auditions at brick and mortar stores, various home systems, Axpona, etc. I'm honestly not sure if there are any truly exceptional tube amplifiers available within that budget that meet my needs. These speakers need 100wpc tubed, or 200 wpc solid state, into 4 ohms to really open up and perform. 

If, in the end, there are no really great tubed options, I've always heard that the Pass Labs XA-100.5's were probably the optimal choice in solid state for former tube lovers. I would also appreciate any thoughts on that option from owners. 
nightfall
djfst,

Thanks VERY much for your continuing help and information. I actually talked to Brent, as Kevin wasn't available, but I understand it, he is Kevin's right hand man. and he was incredibly helpful and knowledgeable. We discussed a lot if things, but I "believe" it was the current model PHI 300.1a which, and again, IF I understood him correctly, would still outperform the 200IQ. And again, that makes rational sense as I have trouble imagining that they are selling a $14k amp that outperforms a $20k amp in their current lineup? But I need to validate that I have all these facts right and will talk to VAC again on Monday. I will report back here and qualify too.

I know that any other amp I am aware of with 100wpc would not be a match I would trust with the load of the Olympica III's, given it's overall difficulty to drive, and it's drops to 2 ohms. Granted I am likely a bit oversensitive on that topic, since I've just had to resell an amp at a loss, that I truly wanted, and had just purchased two weeks ago, but which could not drive the speakers. That despite a major review telling me I would have no issue. 

I will very specifically revisit that when I talk to them on Monday. 

Lastly, thanks for that link. Clearly great minds think alike, as I only just finished reading that entire discussion after looking for more info on the 200IQ's earlier. It's very impressive commentary, though, granted, they are talking about using a pair of the amps as monoblocks. 


djfst,

Quite a bit earlier in this discussion you said "  Would not go with the VAC Phi 300.1.   Definitely go with the updated VAC Signature 200 IQ with continuous auto bias.  100+ watts and has all the bass and tightness of solid state and the midrange is fantastic.    Retails for $14k but there is a like new one listed on US Audiomart.  With the auto bias of the 200 IQ, you can plug in any KT88, KT120 or KT150 and change out the 6sn7 driver tubes if you want to tailor the sound.  It is so user friendly and the stock tubes are wonderful though.  Have owned both the Sonus Faber Olympica III and the Elipsa SE.  The VAC controls the bass of the olympica which can often sound a little bloated if not having a high quality amp."

Which VAC amp were you referencing as handling the Olympica III and Elipsa so well? I originally thought you were referring to a previous amplifier, not the Signature 200IQ. If it was the Signature 200IQ stereo version, that would carry a lot of weight towards my decision. 
Sorry for the confusion - It is the stereo Signature 200 iQ that I used with the Sonus Fabers and I felt it handled them with ease.  I moved from a Primaluna HP amp and the 200iq was a significant jump.  Everything came into focus and the bass improved significantly.  

That now makes sense about the current version 300.1a  beating the lower priced 200iq.  I thought you were referring to the older 300 model that is listed on audiogon.   It would seem strange that Kevin and Brent would give different information, but Kevin told me the power output of the 200iq would hand the Olympicas fine.   It may also have to do with the quality of the wattage.  The VACs put out a lot of power, but it is quality continuos power - Kevin gets a lot out of his amps.  Happy to help and keep me posted.  I understand being burned before on your prior purchase - I feel for you.   Kevin is one of the most honest and nicest guys in the business and can't believe he will steer you wrong.
Also - I always use the 8 ohm taps for the Sonus Fabers (both the Olympicas and Elipsa), though they are rated at 4ohms.  Definitely performed best on the 8 ohm taps for both the Primaluna and VAC amp.

Did you ever look at the impedance curve for the Olympica III?  Here is the link:  http://www.soundstagenetwork.com/index.php?option=com_content&view=article&id=1285:nrc-measu...

They only dip into the 2ohm territory very briefly and stay at or above 4 ohms most of the time.   At 91db,  I didn't think they were extremely challenging to drive well, compared to some other SF models like the Amati Futura and other homage models as well as other manufacturers speakers.  
Thanks for the tip on the 8 ohm taps. I would not have expected that. Another reason why it's good to experiment on what might work best. By the way, what preamp were you using with the Olympica III's and the 200IQ?

Very eager to call VAC tomorrow to get clarification, and answers to some key questions. After that, I think I will know where I stand, and what to do.