Bi-wires links for speakers ?


I heve the Proac Studio 140MKII single wire connected to my Mcintosh system with Tellurium Q Ultra Black speakers cables ,my speakers have the standard metal strip jumpers which came with the speakers and I am considering to replace it with the Tellurium Ultra black Bi-wire cables links which are not cheap at all.
Is it worth it ? Do I get sound improvement by replacing standard jumpers with hi-end Bi-wire links?

https://www.telluriumq.com/jumpers-bi-wire-links/
itzhak1969
For the same dollar amount, you can buy a set of single wires and some short jumpers made from the same wire, or a double set of wires one or two steps lower down the product line of a given manufacturer.  So unless there's something very special going on with the amp or the speaker, I conclude it's better to go with single wiring.  I went with Wireworld, that offers those short links in matching wire.
I know it's not for everybody but on my Vandersteen, as they suggested the biwire, it does make a difference and you can hear it.
I have found best option is to get rid of cheap jumpers supplied with speakers. Upgrade will be well worth it. Should at least match quality of speaker cable. Nordost has done testing and believes a single quality run with matching jumpers to other speaker terminal improves sound over big wire option. I have recently moved from big wire Nordost to single run Valhalla with matching jumper.
I am always surprised (yet again) by those who insist "it doesn't make a difference" . when it does. Either they have a crap system that not much makes a difference or they have cloth ears. or probably both.
After trying various Nordost  up to the Frey, I ended up with the always reliable Chord Signature jumpers. In my travels in this area I seem also to remember an odd fact I think Proac mentioned, that it made no difference if you jumped up or down (so to speak).
@jmcgrogan2 :
FWIW, gdnrbob is a dealer, though he doesn't like to disclose that information, as it may show his bias. So obviously he will think that if you bi-wire you will spend twice as much on cables as you were planning to.
I don't know where you get your information, but allow me to disabuse you of the notion that I am a dealer.
As a matter of fact, my 'bias' is confirmed by the observations of Richard Vandersteen who has clearly remarked, many times, of the benefits of bi wiring. In fact, you can read it for yourself on his webpage.

@itzhak-From  Vandersteen Q and A:

Don (3/07/07): Richard, Are quality jumpers with a good quality cable superior to internally bi-wire cables? What about running two sets of separate cables from amp to speakers? I really enjoy my 2CE Signatures. Thanks,

Answer: HELLO DON, THIS HAS BEEN BEATEN TO DEATH ON THIS FORUM SO HERE WE GO. JUMPERS WITH MONO WIRE OF EQUAL QUALITY WILL ALWAYS SOUND BETTER THAN INTERNAL BI-WIRE. TWO SEPARATE WIRES FROM AMP TO SPEAKER IS TRUE BI-WIRE AND GIVEN SIMILAR WIRE QUALITY WILL BE SUPERIOR.

You can read his rationale in the Treo Manual:
http://vandersteen.com//media/files/Manuals/treo_manual.pdf
Though you have different speakers, the same concept applies.
Bob