Can I go wrong with Stillpoint Ultra Mini anti-vibration isolation feet?


I am researching what anti vibration isolation feet to add to my components. I came across a Galen Carol article which compared and rated various isolation devices. The Stillpoints rated the highest among isolation feet with at 9 out of 10 rating. If purchased used I could afford Stillpoints bottom of the line Ultra Minis for my Marantz KI Ruby CD/SACD player and Luxmann L507u Mk2 integrated amp. Maybe later some more for my Shunyata Hydra Denal 6000/S power conditioner. Do you think these would be a good choice for my system in their price range of maybe $350 or more a set used.

If it makes a difference the rest of my system is a VPI Classic 2 turntable with an Ortofon 2M Black cartridge, and a pair of Magico A3 speakers. The components are sitting on built into the wall shelves. The top shelf for the CD player and turntable is a slab of marble floating on a cushion of that rubbery shelf liner you can use for kitchen drawers, which is on a floating slab of 3/4" Baltic Birch plywood on another piece of shelf liner over a fixed 3/4" plywood shelf. The integrated amp is on the middle shelf similarly designed but without the marble level. The bottom shelf, the same as the middle has the power conditioner and my DISH box for watching TV.

So what do you think? Would the Stillpoints be a good choice or should I be looking elsewhere and why. Again I’m only looking for feet, not shelves or platforms. I’m sure some of you have some experience with these devices and could help guide me along as I’ve none. Thank you for your thoughts and I'd appreciate your advice.

Below are some of the more affordable higher rated isolation feet I’ve been taking a look at from the Galen Carol list along with his 1-10 rating on each. The Stillpoints are a bit more pricey, but have the highest rating, so maybe are worth the extra investment. The full list is at https://www.gcaudio.com/tips-tricks/a-brief-survey-of-isolation-devices/

Aurios Classic- Roller Ball (8)

Pro Max- Roller Ball (7)

Decouplers- Roller Ball (5)

Black Diamond Racing (BDR) Cones- Rigid (5)

Clear Audio Magix- Other (7)

Daruma IIIi- Roller Ball (7)

DH Cones- Rigid (7)

Isolation Bearings- Roller Ball (7)

Finite Elemente Ceraball- Roller Ball/Other (7)

Cerapuc- Roller Ball/Other (8)

Gingko Mini Clouds- Viscoelastic (8)

Marigo Small Cones- Rigid (6)

Reference- Rigid (6)

Stillpoints- Other (9)

Symposium Rollerblocks - Roller Ball (8)


Thanks for looking,

Mike



skyscraper
@slaw

Hi,
The Pneupods are not designed to drain internal vibrations of a component. Damping these internal vibrations should be part of the original product design. Pneupods are designed to isolate the component from the platform/rack/cabinet on which it is placed (structure borne vibrations, especially in the critical audio frequency spectrum).
As a side note, I addressed this internal vibration problem back in 1993 by totally damping my TT-1 DAC case, PC board and many individual parts: electrolytic capacitors, toroidal transformer, PC board, and all IC chips with proprietary damping material. This had a significant, positive effect on the overall sound quality, especially reducing the noise floor and background noise.

Cheers.


Q pods from Magico sound much better in my system then Stillpoints better stage,focus,depth and bass detail.Symposium roller blocks are also much better sonically.

using ultra minis under my line stage and phonostage and love them. Saves me from spending lots on a rack
Post removed 
I wonder if anyone else has tried ( feel free to laugh but they work pretty darn well IMO)
rubber hockey pucks
as isolation feet, for < $2 each hard to go wrong I have several sets that I use under amps, UDP.