Cooling Help in a Closet Equipment Room


1) I need cooling solution/suggestions.

2) Some way to make my rack swivel, or get a new one.

Well, one solution down, (move equipment to a dedicated room) and two to go. I am having an electrician wire the room in 2 weeks, which leaves me this amount of time to decide how best to cool the room. With just 5 pieces of gear in a 10 x 8 x 3 room (closet really) and NO VENTILATION now, one would not consider this a problem since this room is usually much cooler than the rest of the house. The associated gear, California Audio Labs CL-2500 series of equipment (4 items) and the Monster AVS-2000/5100.
The amp is fine in stand by, but the processor is too hot to touch, even in standby. Now granted, I have it sitting IN a Salamander rack and can move it to the top, I think I am going to move the amp to the top, and yes, I will need t have a custom top made to hold the depth of the Cal amp, leaving the SSP below. I will remove the sides of the rack and have no back to it. I can get great spacing since I have an S20 and S30 on top of each other, and may also use the S40 in there somehow. So spacing will not be an issue for ventilation.

Now, this sight, www.activethermal.com I pulled from other threads that talk about cooling a closet, but it is a fan that sucks hot air out of the room (which I can install) and have the hot air vent out of the closet to the outdoors, seems easy enough. Now, since the Cal gear runs warmer than most gear (due to the Class "A" circuity?) I would like to cool the room if possible/necessary. a) If cooling, what would one suggest, b) if not cooling, but moving air, would a fan(s) be fine?

My other question is since the closet is about 3ft wide, is there such a think like a large LAZY SUSAN I can put under the rack to make it swivel (cable and equipment swaps) and if so, where would one find such a thing? IF NOT, suggestions for a rack that does swivel?

Thanks in advance for your help!

Dan
Ag insider logo xs@2xporschecab
If you have forced air, I've designed a number of home theater rooms that I put a return air louver in the equipment closet. This would require a louvered door. Swampwalker has a good idea if you have hot water or steam heat.
An exhaust fan will work good, especially if the room where the closet is adjacent to is air conditioned. For the 240 cu ft closet, I would suggest a fan/light ventilator with a 120 cfm capacity. Mount the unit in the ceiling, run 3-inch flex aluminum from the fan to an exterior wall or roof jack.

You don't need to louver the doors - a 1-inch undercut (2-inches is better assuming a 28-inch door) will infiltrate the makeup air. This will effectively cool the closet, not to living room comfort but enough to keep your equipment from tripping on high heat overload.

You do not want to bring in outside air as the makeup - too much humidity in the summer. The interior 70 to 75 degree air is adequate.

Look into www.grainger.com for "bathroom ventilators", made by Broan. It's a start - and the cheapest way to go. Good luck.
I made a hole in the attic and fed a dryer hose through the closet on top of the rack, the other end I shoved it in the furnace air return in one of the rooms air return.

The hot Air in the closet is sucked automatically out of the closet by the furnace.. works well as I have my furnace on low speed continually..

http://members.rogers.com/mzn50/