Creek 5350 SE, Channel Dropout


I have a Creek 5350 SE Integrated Amplifier that has served me incredibly well for over a decade in my modest Bedroom system. However; I'm now experiencing intermittant channel dropout more and more frequently. Making it difficult to pinpoint is the fact that it can happen in either channel at different times with various source signals (TV, Cds, FM, DVDs). The sound at first crackles, distorts and then stops completely until I rap the unit with my knuckle for a moment and then, sometimes, the sound returns as it should (or not). I want to save my knuckles and spare the amp. I've eliminated all of the external possibilities such as interconnects, speaker cables and other components. I'm sure it's the amplifier in some way.

I found a thread here on Audiogon that identifies a possible problem with the ribbon cable wiring inside the amplifier? A suggested possible solution was to substitute the ribbon cable with point to point wiring instead.

As an experienced former lab tech, I believe I'm capable of performing this mod if it's a good idea?

MY QUESTION: Can anyone reccomend a high quality wire, solder and source for these items to use in this mod that would replace the ribbon cable?

Any additional experience you can share regarding this complaint would be most appreciated. I really love this amp and would gladly go the distance to make it last another 10 years or more.

I thank you in advance for your wisdom and experience.

Very Sincerely,

REL2

PS Does anyone have a schematic for this unit? I can't find one anywhere.
rel2
wow...the power of the web...i hope my issue is like REL2's and moreover is solved by me fiddling with the ribbon cable(s). REL2's problems are exactly what i have experienced recently. i first thought it was my speakers but after a bunch of random occurrences, i just last night came to appreciate that it was the Creek unit.

i however, somehow thought it was related to the input selector switch (it still may be) as it seems the problem happens when i switch sources...

time will tell, but i'm glad to have seen i'm not the only one with this problem and hopefully collective wisdom will mean a solution that doesn't involve buying a new amp!

(i too have had mine for almost a decade...bought it shortly after it came out in 2001)

Derek
The problem has returned. It is definitely a faulty Input Selector Switch. I'll purchase one from Roy Hall, install it and report back. I think now that this has been the problem all along. Incidentally, I tried cleaning that pot (all of the pots) while I had the amp opened up for the ribbon. It's possible that I wasn't able to effectively clean it but my current conclusion is that it's simply mechanically/electrically faulty. I'll post back what I find. It may be a month or more before this comes to a conclusion on my end, I have a lot going on right now and little time to address this.

Rob
Was the Input Selector Switch difficult to install? It is possible I have the same problem.
First of all, my apologies for not reporting my results after the repairs had been performed. I was personally unable to install the motorized Input Selector Switch. It was simply too involved and technically complicated. There are several rows of pins that have to be de-soldered so I wrote to Roy Hall asking for advice.
I was contacted by email a short time later by a gentleman named Mitch Singerman in Los Angeles who Creek refers for repairs on the older 5350 SE units. I spoke to him twice at length before sending him my unit. I was very impressed with his experience and technical savvy.
Indeed, the Input Selector Switch was the culprit on my unit and Mitch swapped it out. However, he will be the first to tell you that this is typically not the cause of this common 5350 SE complaint. Usually it’s the ribbon connector or some function of the ribbon connector terminations that are causing the complaint. He can only tell by testing it on his bench.
Mitch also made a few adjustments and minor repairs as well as cleaning the entire assembly before sending it back to me. I was very pleased in every respect. His charges are very reasonable.
My sense is that my 5350 SE had a problem of some kind since the day I received it (although I have to admit that it served me incredibly for many years before the channel began to drop out). The reason I say this is that after Mitch repaired the unit, it sounded very different than at any time prior to the repair. I say this only in positive and glowing ways. The bass was improved, separation was much more pinpoint and resolution had improved so much that it made me think I received a different piece of equipment than the one I had sent for repair, something much more expensive.
I got the unit back from Mitch at the end of October 2010. It’s been in use for several hours a day every day ever since and sounds fantastic. I’ve been a huge fan of this integrated for nearly a decade and anticipate many more years of enjoyment. It does some things even better than my fabulous Sansui AU-20000 Integrated (but not everything).
If anyone would like Mitch’s contact information, send me an email.
Thanks for the info. I opened up my 5350SE last week and connected/dis-connected the ribbon cable connections several times to wipe the contact surfaces clean. Cleaned with Deoxit and applied a thin coating of ProGold on the pins. Also cleaned the volume pot, switches, and other connections. I noticed how involved it would be for a input selector switch replacement while the cover was off. Better left to the pros. I haven't had any channel dropout nor switch noise since the cleaning. Hope it worked, but it has only been a week so far. I know what you mean. The 5350SE is a fine piece of equipment. If something were to happen to it, I would definitely get another.