Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure


Cube Audio (Poland) designs single drivers and single driver speakers. 

Principals are Grzegorz Rulka and Marek Kostrzyński.

Link to the Cube Audio Nenuphar (with F10 Neo driver) speaker page: 

https://www.cubeaudio.eu/cube-audio-nenuphar

Link to 6Moons review by Srajan Ebaen (August 2018):

https://6moons.com/audioreview_articles/cubeaudio2/

----------------------------------------

Parameters (from Cube Audio):

Power: 40 W

Efficiency: 92 dB

Frequency response: 30Hz - 18kHz ( 6db)*

Dimensions: 30 x 50 x 105 cm

Weight: 40 Kg


* Frequency response may vary and depends on room size and accompanying electronic equipment.
david_ten
the Nenuphars are front to fifth row or in the club or studio. Something very live about how they position you to the music

+1, Stephen.

I came across a listing and assumed it was yours. Good to hear you are holding steadfast with the VR integrated.

I cannot offer any suggestions in direct comparison to your TotalDAC.

If you get the opportunity to audition T+A’s SD 3100 HV (their reference streaming DAC), I encourage you to do so.
@stephendunn A couple dac thoughts. Have you tried anything from the aries cerat kassandra series? http://aries-cerat.eu/products/da-converters/kassandra-series

Also curious if you’ve tried anything from SW1X. They've got a range of products up to the DAC V...  https://sw1xad.co.uk/product/sw1x-dac-v/

Would love to hear listening reports if you have tried something from either company.
David, thanks for tip on T+A's SD 3100HV.

cal3713 Have certainly read impressive things about the Aries-cerat new dac.  Not sure if I could finagle a home audition though and I no longer buy anything without.

I have researched the SW1X dacs and have come close to ordering the SW1X Dac 3 Balanced (they do have a return policy) but have hesitated because of it's lack of DSD processing.  Probably wouldn't miss it.  

My local dealer is now representing Analog Domain, so their dac maybe my next audition when he gets it in.  Some say it was as good as the MSB Select at a recent audio show. 

@stephendunn  If the T+A unit is a serious contender for you, reach out to me via PM. A home audition is doable.

Re.:  "Not sure if I could finagle a home audition though and I no longer buy anything without."

@stephendunn
Any suggestions would be appreciated.
Hi Stephen

I’m currently using an Allnic D5000 DHT dac which I’ve had for nearly three years now and have been very happy with it.

The original early models used to chew through tubes a bit but that was later rectified (pun intended) with an upgrade and the later models didn’t suffer with that problem.

It received a glowing review on Stereophile then managed to achieve the worst test results of any component ever tested in the lab which was later put down to a bad tube.

The review unit was sold on and it was never re-tested by Stereophile so it now has a dubious and mythical status.

As we all know some things can’t be tested in a lab.

There was also talk of a new unit coming out to replace it but as yet nothing has emerged from KS Park’s workshop.

Anyway, as I said I’ve been very happy with it and I have great synergy with a balanced connection to my Allnic T2000 integrated KT150 tube amp.