Current sensing phono stages w/Rega?


Hey folks,

Anyone using Channel D Lino C 2.0 or the Sutherland Little Loco with a Rega RP8? 

I got some great advice here on researching my first cartridge and phono stage upgrade.

Cartridge was upgraded from the Exact MM to the Ania Pro MC on my Rega RP8.

After researching the suggested phono stages, I home demoed a Musical Surroundings Nova III (with both stock walwart and optional LPS), Rega ARIA MK3 MM/MC, Black Ice Audio F159, and a Konus Audio Vinyle 1000MC Mark II.

The Konus is the only current sensing unit and the one I like the best. 

Two other current sensing units I would like to try are the Channel D Lino C 2.0 and the Sutherland Little Loco but came across the following:

The Absolute Sound Channel D Lino C 2.0 review excerpt:

Briefly, any phono cable/tonearm combination where twisted-pair-conductor cables are employed and the two conductors are not connected to the turntable (or shield) ground can be used. An example of a tonearm/cable that can’t be used would be a standard Rega ’arm where the shield is connected to one of the outer shells of the RCA, which is also a signal connection.

Stereophile Sutherland Little Loco review excerpt:

Your tonearm wiring must be fully balanced between cartridge and phono preamp, with no connections between any of the tonearm leads and ground. That means that the Little Loco won't work, for example, with your Rega arm, unless it's rewired. 

Has anyone rewired a Rega to work with either?

Thanks everyone!

hleeid

I agree 100% with @plinko.

@jc51373  I like my RP8 and can only imagine how your P10 sounds.

So far, the synergy with my turntable and the Konus has been great!

Hope you find a sensible and easy solution and can enjoy your setup.

Thanks guys..I have another Phono stage coming tomorrow. Tron Convergence, which is not a current sensing. Gonna shoot em out and obviously listen for any noise from the Tron. Will report back. 

Not writing off the Konus 1000 yet, it's a really good PS. Like REALLY good. 

@jc51373

Where did you get the information that Rega will make a balanced arm? Their US distributor is stating they have NEVER done that for anyone.

Local dealer here in New Zealand - I saw the arm when it came back.

Distributors and dealers often say things that are not true because they cant be bothered to do anything outside the norm.

I suggest you contact Britaudio in the US - they do re-wires on Rega arms and may be able to help you.

 

Got the other phono stage, it does NOT have the Buzzing noise, and as I mentioned it is not a current sensing phono, rather a voltage regulating. It’s a great phono stage, but the Konus is better, and the difference is not small. Dynamics are better, sound stage deeper, dynamics and leading edges better, bass it tigher and stronger. Its like the gain is turned up more than it is on the Tron, neither have adjustable gain.

Creates a dilemma since the one that sounds better has the noise. I am going to call britaudio next week to see if they have seen this before and see if they can validate that if I rewire the Tone Arm it will solve this issue.