I have this cart and there is about an 1/8" clearance on mine. I would think somethings not right.
Dynavector XX-2 MkII, riding too low?
I own the cartridge in the subject line. When I lower it onto the record surface the cartridge body is very close to the LP......only a tiny crack of daylight.....maybe a mm or two of clearance. Is this normal? Is the suspension collapsed?
(Tonearm is level to LP and VTF is 2.0g)
TIA for the help!
(Tonearm is level to LP and VTF is 2.0g)
TIA for the help!
- ...
- 18 posts total
I just took cart off the arm and measured it with my calipers. Best I can tell, diamond is about 2mm below cartridge body. Once tracking force is applied, that distance is less. So yeah.....less than 2mm clearance when record is playing. 1/8 inch is 3.2mm. If that's what it is with tracking force applied, I do appear to have a problem. Ugh! |
Picture is worth 1000 words. Please go here to see the situation: https://www.audiocircle.com/index.php?action=gallery;area=browse;album=28086 (Is there a way to embed pics into my post?) |
- 18 posts total