Ethernet Switch

I think , it is 1000mbps

https://www.adark.co/products/afterdark-project-clayx-buffalo-bs-gs2016-cascade-x-10mhz-master-clock-input-module-black-modernize-edition?_pos=24&_sid=bec092ecc&_ss=r

Try putting a good audiophile ethernet switch right in front of your streamer.  It can make a huge difference in a resolving system.  Examples are GTT Audio Dejitterit, JCAT M12 gold or Premium and Network Acoustics Tempus.  I have had all of these in my system and they all improved things.  I currently stack a JCAT M12 Gold switch going into the GTT Audio Dejitterit Switch.  Others may not believe, but I hear the improvements.  

I think how much / if you will hear a difference will be dependent on your streamer. The better the streamer the less likely you are to hear a difference among routers. 

A Netgear 8-Port Switch is just fine. All the switchgear upstream to the streaming source is of no better quality, it's just built to support hundreds, if not thousands of connections, and with extensive - and expensive - network management capabilities you will never need. I spent the better part of my professional career designing local and wide area networks for some of the largest companies and telecommunications providers in the world. Believe me when I tell you they laugh at the idea of 'audiophile' grade Ethernet. Ethernet itself and the associated software protocol suites are designed from the ground up to be resilient and highly resistant to environmental noise. Streaming audio and even streaming 4K video are considered very light loads on modern networks. Ethernet jitter - the variation in packet arrival times - are 100% mitigated by the packet buffers. If there's even a 1-bit error, the entire packet is retransmitted and reassembled in milliseconds, automatically and transparently to the users. 

Netgear will be just fine. But…can you use one of the router outputs to drive the signal to your audio room and just use switch for all other stuff? If so, it’ll be worth trying.