IME, the SF Minuetto will be a very tough mate for any subwoofer. The speaker's FR is significantly elevated thru the entire bottom octave (plus) of it's response. If you mate a sub for seamless transition at the crossover point, you'll have too much bottom end, overall. If you set the sub for a natural octave to octave balance overall, you'll have a significant level mismatch at the crossover point. The only solution that worked reasonably well was to mate the sub for smooth "hand off" and slowly taper its response (as pitch falls) with parametric EQ. And even that wasn't particularly great.
Marty
PS There are a lot of threads here re: subwoofer "speed". You might want to read some of them. My guess is that you'll have a different view of the world afterwards.
PPS As to speed of a the large driver vs the speed of a small driver debate, I've tried both (extensively) and I come down squarely on the highly damped driver (large or small) side of the fence. In all other ways, large drivers are compelling, so I'm a highly damped, large driver guy, myself.
Marty
PS There are a lot of threads here re: subwoofer "speed". You might want to read some of them. My guess is that you'll have a different view of the world afterwards.
PPS As to speed of a the large driver vs the speed of a small driver debate, I've tried both (extensively) and I come down squarely on the highly damped driver (large or small) side of the fence. In all other ways, large drivers are compelling, so I'm a highly damped, large driver guy, myself.