I've a 48 years old Sony PUA1500L still works perfectly.
https://www.vinylengine.com/library/sony/pua-1500.shtml
https://www.vinylengine.com/library/sony/pua-1500.shtml
Favorite used tonearms under 1000 dollars
Some of you may know that I have put together a Victor TT with the CL-P2 plinth with custom armboards. My new armboards allow me to quickly change arms using custom inserts.
So far, I have a Audio Technica ATP-12T in the back position and a Victor UA-7045 on the right hand side.
My cartridge of choice is the Denon DL-103 in various carnations. So low to medium compliance.
On the way is a Victor UA-7082 tonearm and on the shelf is a Fidelity Research FR-54. I will make mounts up for both.
So what are your favorite tonearms that can be had for under 1000 USD? I know Chakster is a big fan of vintage Japanese tonearms and for good reason.
I really love the Victor arms, they are full featured with anti skating and VTA adjustments on the fly plus the build quality is over the top. Probably the best bargain out there.
BillWojo
So far, I have a Audio Technica ATP-12T in the back position and a Victor UA-7045 on the right hand side.
My cartridge of choice is the Denon DL-103 in various carnations. So low to medium compliance.
On the way is a Victor UA-7082 tonearm and on the shelf is a Fidelity Research FR-54. I will make mounts up for both.
So what are your favorite tonearms that can be had for under 1000 USD? I know Chakster is a big fan of vintage Japanese tonearms and for good reason.
I really love the Victor arms, they are full featured with anti skating and VTA adjustments on the fly plus the build quality is over the top. Probably the best bargain out there.
BillWojo
- ...
- 10 posts total
I love the Acos Lustre GST 801 that I got with help here https://www.google.com/search?q=acos+lustre+gst+801&rlz=1C1SQJL_enUS881US881&sxsrf=ALeKk03vA... It's Precision Arm Post Lift, VTA on the fly, is superb, couldn't be easier or smoother. |
Compact arm sometimes needed. I’m squeezing a 3rd arm on my 2 arm plinth, and, it has to allow the dust cover to go on. pivot in the front left corner, arm backward, I had to find an arm with both short spindle to post, and short rear counterweight post (not too wide either) I got the Mission 744lc version of the Jelco sa 250st arm 210mm spindle to pivot, only 58mm pivot to end of counterweight shaft. 18mm overhang, effective 228mm. I also prefer the arm retainer to be part of the arm rather than a separate piece needing another hole. https://www.ebay.com/itm/Mission-Model-774LC-Gimbal-Bearing-Stereo-Tone-Arm-Pick-Up-Arm-Outstanding-... arrived yesterday, nicely built, off to get a drill bit later! |
- 10 posts total