Furutech GTX NCF receptical break in, how long

@ paulcreed, I believe auxinput nailed it on the head with this,  quote- In the end, I think it depends on how much resolution the system has.  If you are working with a very warm sounding system, these burn-in exercises may not affect you quite as much.  However, with a very revealing system, you could be in for a long term burn-in experience.  Though, Rhodium is the way to go if you want the best in resolution.             Personally I run my tube/solid state hybrid digital player with a $5,500.00 power cord that has oyaida plugs on it straight to the amplifier,  so yes, absolutely,  it has to do with resolution of any given system. 

So, this +- 500 hr breakin, is that for the duplex unit as a whole, or per plug?  I would imagine if crystals need to allign, or whatever else voodoo is taking  place, needs to happen where ever current flow takes place, so each recepticle needs roughly that time?

 As it turns out from experience,  the break- in is for each plug in on every duplex,  sorry paulcreed,  I should have told you this. 

All was well Sunday, Monday. Last night bass was thin highs unlistenable. Didn't spend much time listening just enough to see what's going on last few nights My system is slight on warm side of neutral. I have not stopped burn in. I'm not sure what's going on but I'm to the point of boxing everything and dropping it off at Goodwill. I'm wondering if a furutech gold added to the mix may help in the long run.

@ paulcreed, Been awhile, need to mention that you need to run system 12 hrs and then turn off at night, do process all over again each day, this needs to be done after 450 hrs, be patient my friend, I would like for you to keep me informed here with progress, remember, the extended high’s come in at 700 hrs like a brick up side the head, believe me, you will know when the treble detail kicks in.