@tomic601 

Congratulations on Koetsu Urushi Black. That’s a beautiful cart!  As Koetsu being no longer made, I approached my purchase for the history and the legacy. Thought long and hard about one of the stone bodies cart but couldn’t quite extend the budget. I believe, Rosewood Sig. Platimum holds the sweet spot in Koetsu hierarchy. 

Thanks for your recommendation on book (already ordered through Amazon) and footers. Speaking of mats, check out Torque’s CU2900 Copper Mat. 

@elliottbnewcombjr 

Great suggestion on dust cover. I went with 2 arms plinth version. The communication was bit of a challenge due language barrier, I can ask for “extra” width but that may not be possible as they start the work on plinth right away. 

@fsonicsmith

I thought about aftermarket bearing and platter but my dealer suggested that I should hear ‘stock’ 301 first and then start tweaking the TT with aftermarket parts. The upgrade like bearing appears to be a no brainer. I do not know at this time how much a platter would enhance the performance. Is Dobbins platter still available or is it pretty much unobtainable?

It has been a few years since I have had any interaction with Steve Dobbins. I am sure he sources the platter and it is very likely still available. Something I would strongly consider first is just the upgraded bearing and the stock platter. The sound is so damned fun that way. Lively, dynamic, toe-tapping fun. 

“Something I would strongly consider first is just the upgraded bearing and the stock platter. The sound is so damned fun that way. Lively, dynamic, toe-tapping fun. ”

👍

Unfortunately the Gon is doing its FORUM MEMBERS an INJUSTICE by blocking Links to other Web Sites that are totally on topic to the content of  Thread.

Everybody needs a good old link to help, these are coals on the fire.

Stereophile - Budha Bearing review, a few useful tops about fitting these add-on devices as well.

I have used and will suggest Bicycle Torque Wrench as the tightening tool. The selection of the correct Nm Setting is King in such a circumstance. 4Nm is a very good start point. 

An additional Collar used on the Chassis to improve Chassis Rigidity, resulting in substantial reduction on the Chassis Flexion is invaluable.

There is no point having the tightest of tolerances for a new machined Bearing Assembly, set up in a way the Bearing Housing Base is a Pendulum through Chassis Flexion showing the worst of its presence at the Bearing Base.

A Bearing Housing Exchange Is one of a few considerations to be used in conjunction, with adding rigidity to the Chassis and Anchoring the Bearing Housing Base to reduce flexion. Some also have methods to use a Base Anchor as a Energy Drain.       

IsoAcoustics GAIA III

adjustable, several size shafts including m6