Graham Phantom vs Triplaner

Wondering about the sonic traits of both these arms compared to each other.

- which one has deeper bass,
- which one has the warmer (relative) balance
- which one is compatible with more cartridges
- which one has the better more organic midrange
- which one has the greater treble detail.
- which one plays music better ( yes this is a more subjective question ).
- which one goes better with say the TW acoustic raven TT.

Humor me here. What is the difference between VPI or Graham type arm and using different headshell weights compared to using same arm with different headshells??

Also where can you get the Ortofon tonearms from?. They are not on the Ortofon website.
Downunder, speak to Juki for the Ortofon arm, he sells them. I almost got mine there but ended up going with Jeffrey from Highwater Sound in NYC, (because I was buying my Raven from him). I did get the LH-8000 headshell for it from Juki though, (if you get one don't forget to get a headshell because they don't come with one).
A friend of mine has both a Phantom and a Vector arm on a table drilled for two arms. He has both a Titan i and a Transfiguration Orpheus cartridge. Both cartridges sound terrific on either arm. I would characterize the Phantom and the Vector as very well dampened arms -- the arms control and dampen vibrations imparted by the cartridge. This is quite evident by the fact that with either arm one hears very little "groove chatter" coming from the arm/cartridge combination. In this respect, the Vector is slightly quieter than the Phantom. Is this good? In theory, yes, but in practice it depends on one's taste and system interaction. In a slightly dead (or "polite") system, it may be an advantage for the arm/cartridge combination to resonate and "sing" a little. This can make the music sound more dynamic and alive. I've clearly heard this in this same system when a Linn/Naim Aro and Transfiguration Phoenix cartridge was auditioned.

As far as objective performance, with the Orpheus, both the Vector and Phantom tracked a Shure Obstacle course record with equal ability. But, in terms of tracking, both were clearly outperformed by an SME 309 using the same Orpheus cartridge. Still, in terms of real life performance, all of these arms performed well.

I have seen many topnotch vinyl systems built around a variety of arms/tables so I can't say any one combination is obviously superior. I've heard great systems with Vector arms (my own choice), Grahams, Triplanars, Shroeder, Naim, Clearaudio and Moerch.
Downunder, did you come into our room at T.H.E. Show? If so, what day (one day 2 and 3 we had the beryllium-dome field-coil drivers running)?

The turntable was an RPM 2.

It was towards the end of the last day, almost when you were packing up. Tri gave me a copy of the Tri-planer manual to look thru, however stupid me somehow lost it before I could read the thing.