2. analog
  3. 136998-6720

Help me pick a phono, pre and cart

Hi all,
My WF spending restraints are going away so I’m going to upgrade my system.
I primarily play CD, but also have an MMF-5 with Glass platter, Golding GX1022 cart going through a Clear Audio Nano to Ayre Ax-7e to Sig 2 Ce’s.

This year I’m going to Quatro CT’s and upgrading my vinyl pre and source side. Next year I’m upgrading my main pre and power amp.

I’m looking for help in picking a phono player pre and cart. My musical taste is pretty wide: female vocals, rock, blues, jazz; not much classical on vinyl. Think Amy Winehouse/Cold Specks/Pixies/Weezer/Jeff Beck/Johnny Winter/Winton Marsalis and Maynard Ferguson for you other old timers. LOL
My budget is about $8-10k

Right now my main thoughts are VPI Prime Scout or Prime with Grado Statement series cart, and an Ayre Px-5e pre.
In addition to specific item recommendations, I’m very interested in how to split the budget item wise. In other words more or less on player vs cart vs pre, I.e. Scout with Statement2 or Prime with Reference2 for example. Or go higher than 20-30% on the pre?
I lean towards spending the most on what’s least upgradeable - sorry if that’s too general or obvious.
Thanks much
Jim

jetson
toddc2
19 posts
 
The VPI feet do not seem to be very good. Many people prefer to place VPI tables on Stillpoint cones or Bear Claws and remove the VPI feet.

True enough! I replaced the rubber inserts on my Classic 3 with Symposium inserts and added a Symposium Segue ISO platform for it to sit on. One of the best upgrades for the dollar I've ever made.
almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
I'd be careful about impedance compatibility between the phono stage that you choose and your Ayre integrated amp.  The Ax-7e's input impedance of 20K unbalanced and 40K (20K per phase) balanced is too low to be optimal with either the Herron or ARC phono stages that have been suggested.  Or with many other tube-based phono stages, for that matter.

Also, +1 re the ART9, which I use in conjunction with a Herron VTPH-2.

Good luck.  Regards,
-- Al
toddc2
19 posts
 
@jetson 

I swapped out a few phono preamps recently: Zesto Andros to ARC PH6 to Whest PS.30RDT SE+ (the Whest was the keeper for me). These phonos all sounded vastly different and in my case I liked the clarity and lower noise of the Whest. One thing I learned was I needed a little more gain from my phono preamp than the KAB calculator recommended. Buying a phono with several gain settings to match the rest of your system might be a good idea with at least of couple of settings > 60 dB.
jperry
2,454 posts
 
I would buy a Dr. Feickert Woodpecker turntable with Jelco tonearm, and look for a used Audio Research phono stage, maybe a PH-6 and a new AudioTechnica ART-9.

The Dr. Feickert is a great turntable.
almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
From the specs provided at arcdb.ws for both the PH-6 and the PH-8:
Output impedance:  200 ohms Unbalanced. Recommended load 50K-100K ohms and 100pF. (10K ohms minimum and 2000pF maximum.)
From the manual for the Herron VTPH-2A:
We recommend that the VTPH-2A be used with a line stage having an input impedance of 50,000 ohms or higher for optimum performance.

All three of those phono stages provide only unbalanced outputs.  The input impedance of the unbalanced inputs of the Ayre AX-7e is 20K, as I mentioned earlier.

Regards,
-- Al
More to discover