How can I tell if I am overdriving the amp or the speakers?

I have a Hegel H390 driving KEF Reference 5 speakers and when I play something loud, the upper midrange ( saxophone, electric guitar, piano ) start sounding sharp and annoying. The amp is 250 x 2 into 8 ohms, stable down to 2 ohms and the speakers are 90 dbs, 8 ohm, ( min 3.2 ) 50-400 watts. I’m pretty sure it’s not room acoustics, but.




Look at the Stereophile review of the Kef Reference 5 (2017). Go to measurements and look at first graph, the impedance curve is the solid line. 1k - 5k they appear easy to drive. I would try reducing the 4' distance from speaker to side wall, if there are walls, to 3' for starters. How far to the back wall ?  Hope this helps, Best.

In my opinion there is nothing wrong with your gear or your ears. The fundamentals of the alto sax and electric guitars do not go much above 1K hz. The piano obviously does but in most songs the range usually does not go much above 2.5K hz. So the harshness you are hearing is probably in the harmonics, which are being reproduced by the tweeter in your KEF's which also happens to be the frequency range the ear is most sensitive to. (3K-4K). 

Tone control is one way of dealing with the issue or if you are averse to that, room treatments would be the way to go or possibly a combination of the two.

As far as the music sounding better in the morning, it could be because there is usually more ambient noise during the day, which could help mask some of the higher harmonics. Is it possible that you are listening more critically in the evening and using the music as more of a background during the day?


I just reread your reply and here goes. No I haven’t noticed any warning lights. No blown fuse and my speaker wires are 8’ long.