How good is to use integrated amp as preamp with the preout feature

Dear Friends,


I have the Exposure 3010S2 Integrated and Accuphase Power amplifier. I like the sound signature of Exposure so I am thinking to add the Accuphase Power amp to it. I see there are 2 preout in the Exposure and I will use one of them to accuphase. Please note I don't want to Biamp as the sound singature may not match, hence its just the preout that I will be connecting to the poweramp.


Exposure 3010s2 Perout -> Accuphase Power amp -> Speakers

Is there any pros/cons with this setup, I still dont understand why I would need a seperate preamp when I can use the preout.


Thank you

Ag insider logo xs@2xsudheertumkur

Well, it’s free to try assuming you have a pair of decent interconnects available so just see what you think. 

I am using it with the same combination, its been great but I want to know if there is something I am missing or messing the things

The preamp in an integrated amp is built to mate with the power amp section, in terms of impedance, etc.  The pre-outs are a convenience.  The preamp section may still be a match for external amps but it may not be. A listening test is really the only way to tell. 

if the Scenario is that I am not biamping with integrated and power amplifier then it should be fine right as the gain issues will not be of any concern and only power amplifier will be driving the spearkers.

The best thing to do is to try. You wont hurt anything. Be sure to have volume down when swapping use of amplifiers.  There are always gain issues. With some preamp/amp combinations there can be too much gain with the result the volume control has too little range of practical use, music getting too loud at low volume settings. 

Does the manual for the Exposure list the gain of the preamp section? What is gain of the Accuphase?