how many ways to hook up a subwoofer

Im buying a New Pre-Amp and it does not have a connection for a subwoofer .

How many ways are there to hook up a sub? Can you still run a cable from main speakers to a sub? Will that cause stress to your amp or speaker? Any thoughts would be greatly appreciated!


I sure don't want to argue with @ellajeanelle, as obviously is a nice person, but I am involved with pro and consumer both and I cannot figure out what you are talking about with "voicing" of speaker outs vs line level (-10 RCA) or pro level (+4 balanced).  ALL sub set ups in professional applications are +4 XLR balanced, this is the single safest way to do it, straight from the source preamp, using a "Y" cord to split the preamp output between 2 destinations: #1 to amp (then to main speakers)  and #2 to the sub. 

Maybe by your phrase "carrying voicing" you mean some of these highly colored preamps, like an old tube unit, where the line level out is already changed based on the tube circuitry inside the preamp?  That would be a case where the line level output DOES carry the color of the preamp as the only circuitry inside the preamp is tube.   But in the case of most modern or solid state units, the line level output labeled "tape out" or "preamp level out" or "subwoofer out" would be relatively color free.  

If you use the speaker level sub input, aren't you adding the preamp output color to the amp color to the speaker cable color and finally to the sub?   



lonemountain:  You are talking about professional applications and not what's being discussed.  See 2:20 on link: The best way to connect a subwoofer (

 BTW: I have several systems, both HIFI and professional and I know what you mean.  They are all connected differently and speaking for myself, the difference is an audible improvement if connected as described in the video!  Try it!  This video will clarify my post.   Thanks for your input.

Well, my subs (JL Audio) do not have a speaker (high level) connections, only RCA or XLR inputs, and I am going direct from my Lumin X1 to my mono blocks (no preamp). I did not want to use a Y adapter.

So, I purchased a Jenson ISO-Max unit that converts speaker outs (high impedance) to XLR (low impedance). Seems to work very well.


@ellajeanelle    +1.

A requirement is having a subwoofer that has a 'high level input'. Connects from the output of the amp. This way it will respond to the character of the amp. If the amp is punchy you'll get that punch. If you run it from the preamp you will bypass the amp and NOT get that punch.

This was a VERY noticeable improvement in bass quality! (thanks Paul McGowen)