I am not familiar with your unit, but if I were in your shoes, I would unplug the unit from the powerline, wait about 15 minutes for the powercondensors to discharge and open it up to see, if there is a simple switch for changing voltages. If there isn't, possibly the transformer has more than one possibilty for the powerleads to be soldered on to it and if you are lucky, they have markings for say 100,115,230 VAC. Then changing the leads is a cinch, but you must take care not to mix up the positive with the neutral. If you are not sure, see a technician. If they have no markings, bring the unit to a technician anayway or use a stepdown-transformer with it in the first place. The difference between the 50/60 cycles should not matter in your case.
- ...
- 2 posts total
- 2 posts total