Improving a stone rack

After reading a lot of posts on Nobsound springs, I have decided to give them a try, and have ordered three sets of four. @noromance and @millercarbon helped me make up my mind. Basically I warmed up to the idea that you need a vibration-free stand AND vibration devices. So, we'll see. It will take some time before they arrive.

My speakers are sitting on the actual Duluth Gabbro Complex, they sound very good. 

@rolox wrote "I have a tempered glass rack that does emphasize the highs and makes everything sound a bit "sterile" and cold." I understand what you mean! Springs (like Nobsound) most probably won’t solve all of that, but hopefully, help reduce it. It is one of my three strategies: damping component vibes (better feet), damping reflective surfaces (shelves and back wall), and damping the shelf bottoms with absorbant mats. I realize I have an Ikea Apetitlig in our kitchen, and should try it.

@fleschler - my VPI hw19 experience was the same. It needed good feet and even a sand box platform. And the springs needed very careful ’just so’ tuning. Interesting that your phono pre is the one where you noted problems. It is the most sensitive component in my rack also.

A learning experience

I have a Meade ETX125 EC astro-telescope on a tripod stand. I use it on two types of foundation: solid ground (outdoors, not very convenient), or a wood veranda (convenient). Guess what happens. The solid stone ground totally outperforms the wood. The image becomes stable and clear, while the veranda image remains blurred and shifts if I move or walk on the veranda.

I wish things were this clear, in audio.

With the telescope, either I see a crater on the moon correctly and in focus, or I don’t.

In audio it is more - maybe this, or maybe that.

If I should create a new laboratory with precision instruments, e g electron microscopes, what would I do? You guessed right. A combination of total stability and well-tuned component damping. Maybe even springs on stone shelves.

For a Telescope there are also a Tripod Footer that will further absorb energies in the Slab and should give a further improvement to the resolution.

Some even put kiln dried sand in a Bicycle Inner Tube and snake it around the Body, this is also a trick used in the past to improve resolution.

IS is a advancing modern concept as a design and will remove the need for some of these old tricks.