Re the phase issues, yes you are correct and my adapted tweeter crossover uses some conjugate matching to minimise the sharp phase transitions. Infinity's are not everyone's choice and your friend may have a valid point, however, the issue of coherence can be minimised with careful attention to speaker placement and the right choice of a listening room. Any 4 way speaker will need more distance to generate a coherent wave and the ren's are no exception. One big advantage of planar drivers is that the impedance is flat and resistive not only within but also well outside the operating range, so passive crossover design is far easier to get right and can be achieved without RLC networks that rob efficiency and introduce other side effects. Planar driver impedance also remains constant with power which is a source of non linearity with cones or domes. Every design has strenghts and weaknesses and the 90's are not perfect but they really don't do anything very wrong and what they do very right is difficult to live without once you have lived with them for a while. BTW from my brief experiences with Classe amps I think they are an excellent choice for the Ren's but I'm sure you will hear improved dynamics when you upgrade to the CA-2200. I would like to hear that setup. BTW I live in Sydney and bought my Ren 90'S new back in 1995 from Audio Excellence. The RRP at the time was $7999 but they gave me a nice discount. I have owned many other speakers including B&W 801 but these are my fav.
Infinity Renaissance 90 questions
Hi fellow AG'ers, I have just pulled the trigger & purchased a pair of Ren 90's in black ash & had some newbie questions for more experienced members. Firstly as they are still shipping from the US, I'd love to know what finish (Black ash or blonde oak) you prefer? In my case, a micky mouse pair came up for sale at the right price in Black ash, so I grabbed them..
Also, I will be initially running my Rens with a Classe Cap-2100 integrated amp which has been bench tested at 235watts/4 ohms. I know most punters advocate giving them 400 watts per channel, so what do you think? (although the Classe has a truckload of current to compensate). I should mention I plan on upgrading to a Ca-2200 pa & AR Reference 3 in a few years, but for now, the Cap will doing regular duties.
Finally, I would be interested to hear from any members who have re-wired their Rens & had a high-end external crossover built & what results you got? I am planning a very high end x-over mod & re-wire of my Rens with Acoustic Zen wire next year and would appreciate any suggestions.
Cheers!
Also, I will be initially running my Rens with a Classe Cap-2100 integrated amp which has been bench tested at 235watts/4 ohms. I know most punters advocate giving them 400 watts per channel, so what do you think? (although the Classe has a truckload of current to compensate). I should mention I plan on upgrading to a Ca-2200 pa & AR Reference 3 in a few years, but for now, the Cap will doing regular duties.
Finally, I would be interested to hear from any members who have re-wired their Rens & had a high-end external crossover built & what results you got? I am planning a very high end x-over mod & re-wire of my Rens with Acoustic Zen wire next year and would appreciate any suggestions.
Cheers!
- ...
- 62 posts total
- 62 posts total