Integrated stopped working

The switch, or relay could go very easy. It happened to me before
Try un plugging and resetting , if Thst don’t work  it will have to go to a tech.

@s7horton   Is it possible that it is in standby mode, but the bulb is burned-out?  Did you try to play something?

So frustrating.  It took me a while to figure out how to get the cover off.

there is no internal fuse that I can see.  I’m not sure how to “unplug and reset”. But, I have plugged and unplugged many times during my testing.

I don’t think it’s possible it could be in standby, it won’t power on at all.  Either from the remote or manually.  I’m at a loss. It’s just so random that something would happen on the power side but the fuse didn’t blow.

Try different power cord per turnbowm suggestion.   At this point anything is possible.  As for "unplug and reset" you should leave it unplugged for 15min or so.

It’s been unplugged for hours and replugged.  While I didn’t try a new cord, I did take the cord I had been using and put it on a different piece of gear - worked as it should.  Definitely an issue with the Micromega.