krell ksa 80 vs. krell ksa100s


thanks for any input you may give. i have b&w 801 series 3 speakers and currently using the ksa 80 amp. i will be trying out a ksa 100s in the near future. wanted to know if there is anyone out there that is familiar with the 2 amps and i am looking for any thoughts on their performace/opinions with the b&w 801 martrix3. thanks, ralph
newfane
One thing to keep in mind is that for every doubleing in output power there's only a loudness increase of 3db. Three db is just a little more than noticeable.
ihave not heard the ksa 80 but owned a ksa 100s . ifound this amp to be on the soft side and did not seem that it reveals the inner detailing and thought it did not really for a krell go the extra mile in the bottom end. i would call krell and ask them what speakers you are using the amps on and what they feel is the BETTER amp. since you are buying used they most likely will not have a problem answering your question. good luck, bill
I think the KSA 80 is a sweeter amp, as far as the extra wattage with the KSA 100, not much of a difference, if any.
The KSA-80 is 80 watts of Class A, this guy draws full power at all times from the wall, and makes lots of heat, the 100s contains the Sustained Plateau Biasing, thus the (S) designation. Not drawing full power until it thinks it needs it. The power supply in the 80 is more substantial, the 100 was completely different technology, not better, just different.

E-mail if you have any questions about the 80. I'm not familiar with the 100-s as I have never owned one.