Just one observation. Thicker wire has lower inductance. The reason for splinting wire into separate strands is skin effect. For copper skin depth at 20kHz is about 0.5mm * That would suggest keeping wires thinner that gauge 18. In plain stranded wire current would jump from strand to strand (path of lower resistance - to outside) jumping thru impurities (oxides) that are on the strand's surface. Insulating wires eliminates that, but skin effect still exist (increasing overall impedance) since strands are still in each other's magnetic field. That is why there are strange designs, like flat cables or wires woven in helical twist on large hollow tubes, like in my acoustic Zen Satori. Twisting and interleaving multiple hot and returns reduces inductance, I'm not sure if skin effect is audible since most speakers are inductive at high frequencies (higher impedance), but for some speakers like electrostats (capacitive at high frequencies) it can make audible difference.
* It means that in 2mm diameter wire (gauge 12) most of electric charge at 20kHz will not flow thru inner 1mm diameter. Skin depth is the depth where current density drops to about 1/3. Gauge 18 wire has 1mm diameter.
- ...
- 16 posts total
Great post as usual. . kijanki Said:
Da,... right you are. I don’t know what I was thinking. I guess my brain turned off when Michael from Essential Sound Products spoke about smaller gauge wire paralleled to equal a larger wire had a lower inductance than one single solid conductor having the same ampere rating. ( If you go to time marker 5:25 on the video you will see Michael talking about wire gauge and inductance. He does talk about higher frequencies but I doubt frequencies in the 20K range would be present in a 60Hz mains power system. Jea48 said:
Obviously the above is poorly worded, and false. I Knew better. My bad... So when you parallel four 20 gauge individually insulated wires, that gives an equivalent wire gauge of 14awg wire, (15 amps), is the net inductance the same for both conductors? If you get a chance would you watch the video time marker 5:25. Did I misunderstand what the guy said about the inductance? Also if the inductance is the same for four paralleled 20 gauge individually insulated wires as a single 14 gauge conductor how about the capacitance of the cable? Will it be higher than using a single 14awg conductor? Thanks, Jim
|
@jea48 I believe that he is simply wrong. Thicker wire has lower inductance. |
Each of four individual wires will have higher inductance but connected in parallel most likely won't result in 1/4 of individual wire inductance (lower than inductance of solid 14 gauge wire) because they are in magnetic field of each other. I suspect overall net inductance will end up the same as inductance of individual solid gauge 14 wire. |
- 16 posts total