Less fatiquing

Try some Timken bearings as coupling footers.

Model # 09067 bearing resting in LM11910 mismatched race

top each footer with a Small DH Cone

This will give you a very good idea about their performance characteristics, you can then tweak/reconfigure them further to fine tune your results.

I was told the thicker the interconnects the more bass and the less high frequency information will pass through as I have personally found this to be true, could be a solution. I don't like shrill but if it is refined, maybe just a bit extended otherwise look into a warmer amp like the Classe as suggested above.

Phd,

My own experience has been the opposite in regards to cable size vs. sonic performance but I still have to ask if you're referring to the size of the wire itself or the overall cable diameter.

Guys, I have decided to play around with speaker placement and have found a significant difference in spacing them away from each other and placing them near the base of the walls in my 11x12' LR. I live in a one bedroom. In spacing them I have found more bass response and therefore a warmer sound. I have also took your suggestion and am ordering the MIT330 cable as part of a solution. I really like the Bryston and did not want to give it up. It is built like a tank and has two years warrenty left. I thought about replacing it with the MF A3.2 or the CJ2250. But thought I would continue to tweak what I think is a fine amp.

After some auditioning Rotel, Bryston, Classe, MF, Parasound, at home, I purchased the Classe CAM-200 monoblocks. They were the best match for my Tannoy D700's. I had a few music bug friends over to help with the auditions. Not only was the Classe just as detailed as the MF, Bryston(we heard just as much detail in the music), but it relayed the music with more finese(sp?)and was less fatiguing after long listens. It drew us into the music more, and to tell you the truth, made casual listening a little more difficult.