As little more than a long haired child back in the day a neighbor had many Citroen, including an XM that he bought new, circa 1972? His son, my age, used to borrow it and we'd drive it for the regular boring routine that teenagers had back then --the carpets were deeply padded, it had a purple cast to the windows and of course that hydraulic suspension. (I can't remember if the headlights pivoted, i thought those got outlawed at some point in the States). It had a nice engine burble, but subdued. I'd hate to have to restore one of those today. Maybe a Pallas D Decapotable by Chapron?
Linear tracking turntables, whatever happened?
Curious as to the demise and downfall of the seemingly short lived linear tracking TT.
Just from a geometry point of view I would have thought a linear arm should be superior to one with a fixed pivot that sweeps through an arc.
Obviously there is much more to it than that, sort of the reason for this thread.
I am genuinely interested in trying one out for myself as well.
Just from a geometry point of view I would have thought a linear arm should be superior to one with a fixed pivot that sweeps through an arc.
Obviously there is much more to it than that, sort of the reason for this thread.
I am genuinely interested in trying one out for myself as well.
- ...
- 219 posts total
whart I can't remember if the headlights pivoted, i thought those got outlawed at some point in the States)Pivoting headlights are allowed in the US. It's a great feature. |
Ah, I meant the SM, not the XM. Thanks for forcing me to check, @cleeds https://ateupwithmotor.com/contentfiles/uploads/1972_Citroen_SM_front.jpg |
Interesting comments here on LT tables. After going turntable-less for about 14 years, and had previously owned a couple of LP12’s and Well Tempered Labs(which I still highly rate), I bought a Holbo linear tracking, air-bearing turntable system last July. This turntable for one, does not look like an oil rig that some LT units resemble, is fairly simple and straight forward design. It uses a simple low pressure pump that is for all purposes extremely quiet, so much so, it sits on the lower shelf of my equipment/TT stand. I certainly do not hear it running! While setup of arm azimuth can be a little fiddly, it really takes no more patience than any pivoted arm. This arm, as well as the platter are supplied air from the pump, it all works really well, keep it all level, and keep the main arm air bearing shaft clean, you are good to go. I haven’t had any of the fiddliness and constant adjustment stuff talked about above, so no clue about that. The best of all, this table just makes great music, and that with my using a very cheap, entry level MM cartridge, a Nagaoka MP110. Yes, this part will be my focus of this new year, a new cartridge upgrade. Also, Bostjan Holc of Holbo has been fantastic to work with-I have no affiliation etc. with said gentleman, but prior to US distribution here in the US, we worked together to get the table here, and he has quickly answered my concerns, setup questions etc. By the way, Holbo is now distributed by Jeff at High Water Sounds, NYC. I am always interested to hear the varying takes on the technologies and design that goes into products, and like anything, many debates over what is best or worse, and why. Yet really, as is said, many ways to skin the cat, and in the end, what can one “hear”-or not, that which makes one technology better than the other(s). Like pivoted versus linear, they both exist for their varying reasons. The main thing is that the product is well engineered, reliable, and most of all, sounds good and does what it is supposed to do! I love this turntable, it was a huge stretch for me to get back to vinyl after all these years, but I am glad I made that stretch! So all, enjoy your pivoted arms or your Linear trackers, they all have their merits, but most of all, enjoy the music! If you do get the chance though, give a Holbo a listen, you just might like it! Have fun all, now back to music.... |
- 219 posts total