Mark Levinson 533H Amp fuse information


Have a ML 533H amp. It's about 4 years old. The fuse ( I assume its the fuse) in the right channel blew about a month ago after a power surge from my utility. Yep had amp plugged into Tripp Lite surge suppressor; Surge suppressor was toast after the event. Used center and left channels for stereo playback until I had the time to investigate/replace fuse.

Yesterday tried to play some tunes and nothing from the amp. Power LED was on.  Preamp was working fine.

Question: I would like to order replacement fuses for the 533H before I take the cover off. Anybody know the fuse info: brand type, amperage, etc.  Would prefer to replace factory fuses with the same model. Not really interested in "audiophile" fuse replacements.

What's the difficulty in replacing the fuses? I do have electronics experience.
daisydog
Dear @daisydog : " I would like to order replacement fuses for the 533H before I take the cover off. Anybody know the fuse info:..."

that makes no sense to me because the easy way to know the information is just that: open the amp, which the problem with? anyway you can’t use it rigth now.

If you insist not open then put in comunication directly with Levinson and exolain it the overall " problem ", no big deal.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
May not be a fuse, could be the input coupling cap fried and there’s an open circuit.

 Even if it the fuse, send it in for service. You never can tell what else can be the problem and you want to make sure no safety caps were damaged, which could lead to a much bigger expense in repairs.
Never had this happen, but I did work for a power company.  Did you ask your utility to pay for the amp repair?  Were any of your or other customer appliances toasted?
I have a picture of the internal board for the 532h showing the fuses and jumpers. (It should be similar to 533h, perhaps different fuse values though)
had previously contacted levinson about these but they wouldn't give'em out, I saw the photo from a seller on ebay and downloaded it...
if you want send me a pm with your email, and I'll send them to you.
whereabouts are you located?
Thanks to everyone for the information and advice. I opened the amp and checked the fuses; They were all good. 
FYI, two fuse values in amp. F1 is a T50mA L 250v. F2 (there are 4 of these) is a T50 A L, 250 v
Both fuses are 5x20 glass cartridge types.

I will be sending it to the service center for repair