McCormack SMC Audio upgrades: how good are they?

The details of the upgrade are out on Steve's website. I have no idea if the changes will be beneficial (or even noticable) to you. However, if you like you DNA-125 Gold, and want to build on those strengths, an additional $1000-ish (I'm guessing it would only be around $1k to go from Gold to Platinum) for the Platinum upgrade seems like a decent approach.

The only downside that I see is that mod'ed hardware does not hold it's value in the used market (no matter how good the mods are).

Chiho, the upgrades offered by Smc Audio are superb. I think your in a position that alot of audiophiles envy owning a DNA 125 Gold revision.

You might find an ss amp that has a fancier more bullet proof chassis but it will be near impossible to beat the sound quality offered by your DNA 125 with revision. With the upgraded 125 you have already laid a solid foundation to your system, why not like Swampwalker mentioned experiment with different preamps. They can definately make or break a system and will make a dramatic difference.

Also rather than look to replace the 125 & make a regretful decision, why not buy an extra tube amp to insert on occasions for just a different perspective. There is nothing wrong with having two different amps on hand to keep the upgrade bug at bay. Most of all enjoy the music!

Thanks for the responses. I had considered a nice tube amp to "change up" the sound. Something like a set of Manley snappers or Music Reference RM-200's: nice yet affordable.

Speakers are Tyler Linbrook full-range. My preamp is a C-J PV5, although I currently have borrowed an Ultraverve, which was a step in the right direction.

Any preamp ideas? I posted on this a month ago, assuming I needed a SS preamp to mate with the McCormack, but perhaps a tube pre will work. The Dehavilland and C-J are quiet, others I have tried had audible tube hiss. I also have thought about an SMC upgraded RLD-1, but was a little hesitant without first having heard one. SS preamps I have tried in the past have either sounded overly smooth (Classe) or a bit thin (Coda).

Just a couple of additional comments if I may... A previous post alluded to the need for a solid-state preamp if you went with the further Platinum upgrade, and this is not strictly accurate. Your current DNA-125 Gold has a high input impedance (100KOhms) which makes it suitable for use with any type of preamp. The Platinum upgrade normally includes the addition of balanced inputs, and the method I use for this reduces the input impedance to 10KOhms (also true for the monoblock versions). This means that whatever preamp you choose should have an output (source) impedance of 1000 Ohms or less, and this leaves out a few tube and resistor-based passive designs. Most preamps can drive a 10K load with no problem, but you do have to pay attention to impedance matching when making a choice.

On the other hand, all of our work is effectively custom, and you are not required to add the balanced-input option if you don't want it. For your DNA-125, the real step-up is to the Plitron power transformer which more than doubles the amp's current capability. Then there are a variety of capacitor, resistor, and wire upgrades that lift performance considerably further.

Food for thought...

Steve McCormack
SMc Audio

Steve,
on a side issue, how would you characterize the improvement in sound due to the input transformer in the case of the DNA125/0.5/etc. (other things being equal)?
thanks
Luigi