Mint Tractor

I think I might try the blue painter's tape when I align my 90x hopfully this weekend. The marks from the Scotch tape are not that bad but I'd just as soon avoid them. I did recheck my alignment and overhang on the Benz LP without tape after increasing VTF to my prefered range without mishap. I think the marks are already fadding(wishful thinking?)
Like others I'm quite satisfied with this method of alignment. I am most impressed with the tool itself. I feel much more confident that I got it right thanks to the lack of paralax interference and the flat and accurate tool. I still think the VPI alignment sounds quite good but wonder if an arc style protractor wet up to that method will ever be available. Is that what the Wally is? On the Fremer video, his Wally alignment seems to match up well with Harry's.

Pardon my ignorance, but can someone tell me how to purchase a Mint tractor?

Thanks!

Email: mintlp@hotmail.com
Regards
batalok

Madfloyd,
Yip will need your pivot to spindle distance and overhang both of which will be posted on the VPI website. Take the arm off and measure yourself too just to double check. Your dealer obviously set your table up using some other tool so don't be surprised if the overhang is different.(I'd be surprised if it wasn't)Also, bear in mind that each time you make a change in one parameter it often affects others as well. You'll need some sort of scale to set VTF to the approximate range first. Otherwise when you change it you'll likely change the overhang too. Even when you're done, always double check everything to make sure no adjustment has changed another parameter unintentionally. If you don't have Fremer's video, it's a good way to get oriented to all you need to do in the beginning though you'll soon develop your own habits. You can recheck all of this with your VPI jig too before the mint arrives and acheive surprising results with it too. This all takes practice and patience but it will go a long way in getting you where you want to be.