Modding Synergistic Research MPC to Galileo status

I recently had the good fortune of upgrading my stock Synergistic Research MPCs closer to Galileo Status by the help of a friend who is inclined to do such work.

He replaces the Synergistic MPC's four cheap, general purpose 1 amp rectifier diodes with four ultra fast, soft recovery IXYS rectifier diodes and the 470uf 50 volt dirt cheap chinese electrolytic cap with a 680uf Panasonic FM extremely low impedance, high ripple current, long life (7000 hrs). It is now a super low noise power supply.

This mod provides better shielding to Synergistic Research cables resulting in more transparency, blacker backgrounds, increased detail and warmth with even lower noise floor than stock MPCs.

I was really taken aback by the improvements mentioned above. When considering the cost of a Galileo MPC, this mod is a downright bargain.

The cost of this mod will be $40-50. I can provide contact information for additional questions regarding components and price.
Devilboy, I must correct you on one thing, to be fair the list price of a SR Galileo MPC is not $450.00 its $399.00. However, you are correct in that it is way overpriced for what's inside. Four ordinary 1 amp schottky high speed rectifier diodes, an axial lead electrolytic cap of unknown origin with their logo on it, all hot glued in place, does not add up to $399.00 no matter how much quantum tunneling is performed!
My modification to your stock SR MPCs got you there for less than 1/8th the price, as you well know! You will not find a better sonic improvement option for Synergistic Research active cable owners with stock MPCs! BTW I sold my Galileo MPC a few days ago. No longer needed!
Cool! I will be doing this mod as soon as I get my Tungsten power cable. Also good info about plugging it into my PS Audio P3 AC regenerator.
You may want to try going to point-to-point wring and ditching the circuit board as we do in the Galileo MPC. This modification alone is a significant aspect of the improved performance of the Galileo MPC; that and Quantum Tunneling both winds of the transformer, the high speed diodes, and the lead wires that connect an MPC to an Active Synergistic Research product.

Oh, we also Quantum Tunnel the Syenrgistic Research capacitor that we specifically developed and voiced for the Galileo MPC.

As with all Synergistic Research products the Galileo MPC is available for in home audition.

Yours in music,
Ted Denney
Lead Designer, Synergistic Research Inc.
Ted, thanks for joining in. I did in fact at one point try hardwiring, and removed the small PC board and hardwired my IXYS diodes and Panasonic FM Cap to the secondary windings in an early modified version, but because of larger physical size and the radial leads of the components I use, simply could not comfortably fit inside the MPC enclosure. Even so, I heard minimal if any improvement. I have simply never heard great improvement in hardwiring power supplies as you have described, especially when dealing with such a small 1.5 inch by 1 inch sized PC board with only a few solder points.
I HAVE however heard tremendous improvement when one hardwires SIGNAL carrying wires, such as hardwiring loudspeaker crossovers, interconnect cables inside components avoiding chassis mount RCA connectors, and hardwiring loudspeaker cables to avoid using binding posts, etc. Your brilliant ITF Bi-Wire idea would fall into this signal carrying hardwire category, eliminating a connector and solder connection. Thanks, Michael Spallone