Need preamp recommendation


Well, the quest for the tube rolling didn't go anywhere after a quick phone call to a tube vendor who advised me that low noise tubes won't lower the background noise of the preamp. Unfortunately I need to replace my VTL TL-5.5 to something else with lower noise floor.

The new preamp must have very low noise. My amps have about 25dB of gain, and my speakers are 93dB sensitive. It can reveal small amount of idle noise too well, which was undetectable with the same speakers but with power amp of 15dB of gain. Also the new preamp must have low / no gain, or adjustable gain. My VTL has additional 20dB of gain, and it's just too loud.

Some of the preamps that piqued my interests are Aesthetix Calypso, Placette, and Sonic Euphoria. I've read some earlier models of Calypso suffered from noise issue. I'd like to hear from the owners with sensitive speakers and high gain amps if there is any noise issue.

I'd love to try the new TL-5.5 which was long announced, but I don't think it's shipping yet. Anyone from VTL reading this board?

Any other low noise preamp that I should consider? I'd like the tubes, but as tube gears have inherently higher noise floor I'll also consider solid states and passive designs. The budget is flexible, but I'd like to keep it under $3k. The new preamp will be driving Pass XA-30.5.
jylee
Kensetsu, I have kept my VTL TL-5.5 and I'm trying different tubes right now. The noise level came down a little bit with RCA 12AX7, enough so that I don't hear it in the listening chair. I am also trying out an SS preamp that sounds awesome, but sounds a little too lean in my system. TL-5.5 could very well be the best remote controlled preamp under $3k.
Thanks Jylee, I'm already leaning toward that one too, but I'd like to find out more about the Audio Research Reference 2 and LS 26. Have you heard anything about those?
Jylee, if you replace the 12AX7 with 5751 tubes they are 70% less gain. Also Andy @ Vintage Tube Services does an excellent job with low noise tubes.
Jylee, you will also need to check with VTL to make sure you can use a 5751 in the 5.5.