New belt for Michell Gyro SE?

Hi, I would like to know what arm everyone is using with their Gyro SE??? And to what result. I am using an Origin Live RB250 and am quite satisfied with one exception: The adjustments on the arm are quite crude and tough to work with. thanks

Par3nl, I'm also using the OL RB250. I have the optional threaded fitting for setting VTA, which seems like a very solid mounting, but is a pain to actually adjust.

Plato, I also have the threaded adjuster and I also had a machinist make some spacers a bit thicker to give a bit more latitude for adjustment. I am using the Dynavector Karat 17-2 MKII and have been pleased with the performance. I have been considering a better cartridge such as a Lyra or a Koetsu. My consideration is whether or not the OL250 with its limitations will do justice to the cartridge. Mark at OL told me that he mounted a Koetsu and it worked great, do you have any thoughts about it?? BTW have you found out any more about the new belt. Have you considered the OL DC motor mod? Best Regards

i am wery happy w/the o-l modded rb250 on my oracle; also pleased w/the o-l dc motor mod which i installed. i see no reason why a spendy cartridge won't work yust fine on the o-l mod arm, as it is supposed to be superior to both the stock *and* o-l-modded rb900. i currently have mounted a lo-output ortofon mc25-fl, but have a lyra clavis, rebuilt by vandenhul for symphonic-line, that i've been meaning to install. truth be known, the ortofon sounds so nice that i'm in no rush to remove it. i also wanted to get used to the o-l mods before i go ahead & change out the cartridge.

Par3n1 I have heard that the Koetsu does not sound that great on the Michell table and that the sound gets really laid back and somewhat soporific. I use a Benz-Micro M2 which sounds really great, although I don't think it was a significant step up from the far less expensive Benz-Micro silver I was using earlier. I know that both Ortofon and Dynavector cartridges go really well with the Gyro Se.
As for the QC power supply, I made the plunge recently and feel it is a worthwhile investment. However, I also upgraded the clamp and applied the denso damp, which is half the cost of the QC, and feel that it is a better investment that the QC. I would definitely go that route before changing the power supply.