No "Room Correction" Topic option. Why?


I wanted to pose a question on room mods but do not see a logical place
to insert it so I am going with "Speakers" as a good, wrong choice.
Moderators, can you attend to this deficiency? 

My question: I am redoing my listening room in several ways.
Not because it was bad-quite the contrary. But because the room 
was a dark hole so I bought three new windows and replacement door.
The existing wall allowed rain water in from the patio floor outside.

 I started dismantling a 20' section of wall. As I opened the wall i found the
existing base plate-not treated wood, to be dust. Then mold on the drywall.
then termite evidence. 

Once the old crap was gone, I poured a concrete base plate 20 feet and another 6 feet
on the return. Termite damage had trashed the double sill plate and parts of two joists.

With all the wiring exposed I discovered an abandoned 220 a/c line buried in the wall.
Voila!  I had 2 dedicated 110v outlets for another part of the room. 

Might as well add 5 can lights while I was at it.

I upgraded the Streaming ethernet line from cat 5 to cat 7. Might as well
since I had sawsalled thru the old line. 
Then I learned that fiber is a better bet so I will be changing that later.

Another find! A buried abandoned entry door offering a 30" x 80" x 10" shelving
opportunity! 

I started this task by removing the old carpeting.

Now to my question. 

Shall I go with new porcelain tile flooring and plan on area rug -or-
put carpet back for its superior sound absorbing properties?

I hope someone out there has been down this road and has
an experience to share?

Thank you!


chorus
Agree, IF luxury get the room dimensions correct - golden ratio , Fibbonachi sequence, yes!Then room noise floor
The stereo illusion is fragile at best, I myself mostly a seated listener don’t mind 11 bands of analog EQ below 120 hz w typical room node centers and cut 2x boost.
but of course there are other ways
i find real living spaces often far exceed over treated dedicated rooms, not always but often.
best to all
Chorus, I suggest that you also consider the lights themselves. LED's and fluorescents tend to create electrical noise which can get back into your equipment - certainly through the line, but also perhaps through EM radiation.

Does not apply to strips of bare LEDs, and maybe some other LED fixtures.

I used 12V quartz track lighting throughout, powered by 20 little toroidal transformers mounted outside the room (in case they hummed). The electrician was great and did all the hard work, leaving me to sort out logic and connections. 

The editor of Stereophile had an interesting editorial regarding rooms that I totally agree with...a room often adds a sense of reality that renders digital "correction" unnecessary. Digital "nannies" might be useful if your room has no furniture and glass ceilings or you live in a dumpster, but, for example, digital bass correction puts in a slight delay and adds phase issues to a signal that isn't worth it. For my room, furnishings are all the correction I need...for you, buy stacks of bass traps and heavy curtains and you can reach for a sound devoid of life.
Acoustical embedding are the more important..... More than mechanical and electrical one in power to deliver S.Q.

Passive materials treatment are only HALF of the story....

Active device controls can make your audio system to be freed from the limitations of the room...(i mean non electronical device by the way)

Almost nobody speak about that....Except some sellers of very costly device....It is not necessary to buy one if you know what to do..... Cost: peanuts.....

"Generic" designed speakers dont have soul and body, without a "specific" room designed by you to be his working organ synchronizing with your ears....

:)