2. misc-audio
  3. 161683-132085

Nobsound springs - load range

I want to try out the Nobsound springs as damping footers (mainly under my mono blocks and my streamer). I ordered a first set of them and now I wonder about the amount of springs to put in for different weights of equipment.I remember one post that said it works best when 50% compressed (was it @millercarbon?).

I measured the compression of the springs, it takes ~2.5 kg per spring to compress it to 50%. Based on 50% compression target, this yields the following sweet spot configurations (only stable ones, total equipment weight):
- 3 units, 3 springs each: 22.5 kg
- 4 units, 3 springs each (or 3 units, 4 springs each): 30 kg - 4 units, 4 springs each: 40 kg
- 3 units, 6 springs each: 45 kg
- 3 units, 7 springs each: 52.5 kg
- 4 units, 6 springs each: 60 kg
- 4 units, 7 springs each: 70 kgLoad can be considerably higher than expected (somewhere I read about 36kg, which is presumably for 4 units).

Any comments?What about ~10 kg streamer, seems to be too light to compress the springs enough? Does anyone have experience with Nobsound springs under light equipment like this?
Based on your experiences: Would you even dare to put an 80kg floor standing speaker on Nobsound springs?
hm9001
oldhvymec
5,101 posts
 

You looking for equal load distribution, the compression of the pod is what your trying to accomplish. Keep in mind it takes a couple days of playing to settle them in too. Never hurts to take notes and do a final adjustment and placement of the springs and pods. Remember use ear plugs to dampen the springs. Roll them up and put them inside the spring.. Itti Bitty stuff helps..

Regards

ryder
1,687 posts
 

Alright, thanks for the advice again.  Will not rush it.

csmgolf
885 posts
 

@ryder 

Why not try one footer centered at the rear with 5 springs on it? There are manufacturers such as Esoteric that have only 3 factory installed footers under their disc players.

noromance's avatar
noromance
9,732 posts
 

I’ve Nobsound springs under 11 pieces of equipment. All with 3 footers under each.

bkeske's avatar
bkeske
5,597 posts
 

@noromance 

I’ve Nobsound springs under 11 pieces of equipment. All with 3 footers under each.

I just picked up 2 new sets. That is my approach too Brian. Thus, Now have three sets = 4 pieces of equipment. Was just playing around with spring counts on my Belles 400A this afternoon, which is a beast. Started with three springs initially, but added a 4th spring to each of its three today (in the center).

More to discover