Oddball question, hooking up REL Storm III Subwoof

i assume you do not have the owners manual????? if not go on rel site and see if they might. some manufactures do this so you can download the manuals. i think you have to look at the sumiko site and then go to rel as i believe they are their distributor. i think you can go into the tape loop or aux. if you have a selector that says recording.try putting the rca from the storm into that. i looked at my integrated amp and it has recording and input selector. turn the sub's volume down and try tape loop and then slowly turn up the rel. i believe that will work, not as good as the neutrik from having a rel stadium 3. are you aware of the proper set up of rel's?????? if not i can explain it to you as they have to be corner loaded for best results and thats the starting point. there is also certain situations that you do not use the spikes either

BILL L

You cannot connect your sub until you get a Neutrik Speakon cable. When connected to the sub you "high level" controls will be used for adjustments. The cable connects to the same terminals as your main speakers on the amp in the following fashion. Red to positive right, yellow to positive left and black to negative right. This will allow you to use the volume control on the integrated as the master volume control for the sub. (I own the Stadium III).

It sounds like your sub did not come with an owner's manual. You can download the Storm users manual at

http://www.rel.net/index2.htm

I hope you didn't pay "new" price for the sub. It should come with the Neutik connector and the dealer should be able to help you with hook-up/installation.

I have gone to all the REL sites, Sumiko sites and live right by their HQs, ..I
am just trying to get the sub working prior to Monday.

Millenium Bill, I will try the TAPE LOOP, i had tried this, but on the "
PLAY" RCA on the JC Verider amp I am using with the sub, not the
"RECORD" RCA output.